A normal turning
Mike Foster
I had a couple sugar maples succumb to a winter storm a couple years ago and wound up pulling the logs out of the sugarbush and had a local forester/sawyer cut them up into 5/4 lumber and it has been out in the fields air drying till yesterday. I brought in a little less than half of it and proceeded to joint and plane it all. A lot of work. I have an 8” jointer, and some of the boards were approaching 12”. You can joint them on an 8” jointer, but it involves some jigs and running the boards through the planer twice after jointing. Took all day, but now I have about 175 BF of full 4/4 maple ready for its next life, which is built-in cabinets and shelving in our pantry.
So after all that work I decided to reward myself with a little turning. Unlike much of my work lately, this was on and off the lathe and done in a couple of hours. This is a hickory burl that the same sawyer that cut up the lumber gave me a week ago. I have never turned a bowl or HF out of hickory (have turned some spindles), and this was green. What a dream to turn and a lot of fun. I put a coat of oil on it this morning and boxed it up. I am right now on my way to Denver to visit my mother and father, and I decided to give it to them.
So I really can do normal turning. No math involved in this one. Rounded bottom with no foot (I like those).
Hickory Burl, Bush oil
5” W x 4” H



