Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Egg/round CNC drawing machine

Posts

Egg/round CNC drawing machine

#1

Egg/round CNC drawing machine

Craig Daymon

Found this while looking for something else. It is a mini-CNC machine for drawing on round or egg shaped objects up to just over 6 inches in diameter. $250 if you don't want to build it yourself. Otherwise, there is a kit and I think the whole thing is open source, so you can just grab the parts list too.

I'm wondering if you could rig it to hold a burner pen. Even better if you can activate/deactivate the pen during operation.

http://shop.evilmadscientist.com/productsmenu/tinykitlist/430

Possibly some other interesting things on the site too. There is a smaller version for $199 too.

-Craig

Re: Egg/round CNC drawing machine

#2

Re: Egg/round CNC drawing machine

Ray - Middletown, in

I will have one first time I have unearmarked cash. I don't know of any way to turn on and off the pens, they are just standard sharpies and such. The burner I doubt it, but you could put in a pencil and then burn the lines easily.

Ray

Re: Egg/round CNC drawing machine

#4

Re: Another option...

Craig Daymon

Yeah, same thing, different site. That's the smaller, original(?), version.

Re: Egg/round CNC drawing machine

#5

Youtube video of using it to etch a glass sphere *LINK*

Craig Daymon

Found this video on youtube. Someone replaced the felt pen with a small motor driving an engraving bit. Rotary bits are probably easier to use than burners as they are more consistent. (No cooling and heating to deal with.) This video shows it could be done with wood. There is also a link to an explanation of how the etching was set up.


Video of glass ball etching with Ostrich Egg-bot