Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

How many work on more than one thing at a time?

Posts

How many work on more than one thing at a time?

#1

How many work on more than one thing at a time?

John Lucas

Sometimes in my shop I feel like a pinball. (sing pinball wizard if you dare). I have sometimes 3 or 4 projects going at once. This morning for example I applies a second coat of stain to a table leaf I'm repairing for a friend. Then applied some masking tape to a finial I working on for an antique repair. Cut some wood for waste blocks for next weekends demo and class. Then swept the shop which was overdue. put new handgrips on my motorcycle (man was that a pain). Then back to the finial where I painted the first coat of white on the unmasked areas. The mixed up some epoxy and paint for an experiment on creating the peeling paint look for that same finial. Redid the vacuum pump gasket in my mini lathe and then stopped for lunch.

That's kind of a typical day for me, just run from one project to the next. This afternoon will be a slight break. I'm going to an art auction that I contributed a piece. I won't stay for the whole thing because I don't like the noise of auctions and certainly don't have any money to spend. I'll go to the gym for a good workout. Then I'll come back and make another ornament as practice for tomorrow's demo to make sure I have all the tools and all the steps down accurately.

Hope I didn't tire anyone out. I just wanted to know if I'm the only one this crazy.

Re: How many work on more than one thing at a time?

#2

Re: How many work on more than one thing at a time

Phil Powell

Naw you aren't the only crazy person on here....just the leader.

Re: How many work on more than one thing at a time?

#3

Steven Antonucci

Me too (an average weekend day)

steven antonucci

Forged an Adze head

Raked some leaves

Swept up

Turned a hollowform (lost it)

Made a handle for the Adze

Used the adze to start a bowl

Rearranged bandsaw

All by 2PM

Re: How many work on more than one thing at a time?

#4

Leo Cuellar

Constantly, continuously, & circuitously

Leo Cuellar

My big one for the day though, was replacing the wing on my table saw with a cast iron router table. I had mixed feelings about this. While it did take care of some machine population density issues, it cut back my temporary bench space by 54 square inches. You can cram a lot of stuff onto a space that small :\

Worked on the design for my new shop heat system & ordered some of the parts.

Did laundry & repaired a set of my work coveralls.

Did some additional re-arrangement/tidying in the shop.

Cooked dinner & did some additional baking.

Ordered a bunch of glassware & stainless steel for a couple of turning projects coming up.

Did a bunch of internet research & took some time to play as well!

Re: How many work on more than one thing at a time?

#5

Jim in Burlington Ont.

Re: How many work on more than one thing at a time

Jim in River Oaks, Ont.

John, that is your normal, so no it's not crazy, lol. Today I was in the shop working on a set of new pens, worked them all through various steps of my process, garage door open taking in a pleasant fall day, not crazy, just don't tell my physio I was breaking a few bending rules, crazy...

Take care,

Jim

Re: How many work on more than one thing at a time?

#6

George Taylor

Re: How many work on more than one thing at a time

George Taylor

I always have multiple items due, fewer actually in motion. I need to rough out 2 more bowls (once I get another bandsaw blade); turn half a dozen wine stoppers, a dozen pens, and two smaller bowls. I am constantly working to make sure I have the materials lined up, so when I get time (from my day job), I can turn. What I don't tend to do is clean and general maintenance (unless it is over-whelmingly required, like today).

Re: How many work on more than one thing at a time?

#7

Re: How many work on more than one thing at a time

Galen Vetterick

I only worry when I am reloading and turning the same day. So far no powder charge dropped in a hollow form or box. Although it may be a new way to hollow faster by a controlled explosion. I have turned some dummy rounds from wood and so far have not tried to shoot them by mistake.

Re: How many work on more than one thing at a time?

#8

Re: How many work on more than one thing at a time

John Lucas

Have you ever seen Phil Brennions article on texturing with gunpowder? It was in American Woodturner Vol 17 #4. If your an AAW member you have access to all the past issues. I believe he also did some texturing with a shotgun.

Re: How many work on more than one thing at a time?

#9

Keith Tompkins

Re: How many work on more than one thing at a time

Keith Tompkins

HI John, I went to the sheep and wool exhibit at the fairgrounds. Then tilled up my garden, and planted my garlic. 300 bulbs. Washed up the tiller. Went grocery shopping . Paid couple of bills. Made dinner. Raked up clippings from yesterday's mowing...2 acres worth. Did not get a chance to work on kitchen, which is completely gutted: new tile floor, then new cabinets. Yep, building from scratch, butternut.

Re: How many work on more than one thing at a time?

#10

It's a discipline...and necessary

mjonesrdg

If I don't have three or four in stages of completion, I'll waste time, and, I'll get ahead of myself applying sealer or something long before that is a next step...and knowing that I might cut more off of the form....needing to go back and reapply sealer.

Also, I like to have some "sit-down work"...hand sanding or filling/repairing/improving kind of details. My Afib problem requires that I take a rest now and again. Fatigue will cause mistakes, mental errors, mostly, before I feel physically tired.

Often, I like to apply finishes at the end of a day so that they will be ready the next morning for more application, and I like to tackle the toughest and most demanding work for mid-morning when I am most alert and ready.

I am much more productive with my shop time when I have three or four in stages of progress.

Re: How many work on more than one thing at a time?

#11

All the time!


Re: How many work on more than one thing at a time?

#12

You guys make me feel better 


Re: How many work on more than one thing at a time?

#13

Peeling Paint Look Technique - With Elmers Glue *LINK*

charlie belden

There's a quicker and easier way to get that Crackled Paint look than using epoxy.

Though you can buy a jar of "crackle medium" at art supply stores, you've probably already got Elmers Glue - the white glue


Crackle Finish using white  Elmers Glue

Re: How many work on more than one thing at a time?

#14

Re: Peeling Paint Look Technique - With Elmers Glu

John Lucas

Thanks Charlie I printed that off. I have used 3 or 4 other methods for crackling paint over the years.

Re: How many work on more than one thing at a time?

#15

Re: How many  work on ME!!!

Terry Scott

Yes John I always have what seems like 20 projects on the go

If a piece isn't working I put aside and come back to it.

Sometimes a bit of wood in the heap say's turn me turn me and half way through his mate says what about me .

Re: How many work on more than one thing at a time?

#16

Re: How many  work on ME!!!

John Lucas

That's funny Terry. I wondered how that happens. I guess all my wood is screaming "Turn Me". Kind of like in the Little Shop of Horrors, "Feed Me" Hopefully it won't turn into the monster plant. "I"m a big green mother from outer space and I'm bad"

Re: How many work on more than one thing at a time?

#17

Thanks John

Galen Vetterick

Finally had time to check out the AAW article. For an old guy :D you still have a good memory! That was published in 2002. (The tips editor even had dark hair back then ;) )

My smokeless powder would burn a little slow so not sure how the effect may come out. I may have a small can of black powder but probably old enough it is not very stable anymore being 20 years old!

Thanks for the reference.