I haven’t posted any of my work in some time so here goes. This piece was inspired by a project demonstrated in one of Ali Avisera’s videos. The boxes are Oregon myrtle burl and the finials are ebony. In retrospect, the stack was much more stable than I expected and the finials could have been more delicate. All of the boxes have suction fit lids of course.
The myrtle was part of about 100 pounds of burl given me by a friend after the tree came down on his property.
Dennis, I don't know how old you are, but THIS is the kind of unique piece that should have represented woodturning at the Renwick show (per thread below). ...GG
Beautiful presentation of some beautiful wood. I agree that at least the top finials could have been thinner. Is it the photo or is the lid on the top box a different profile than the bottom three. If so, why?
Thanks Matt. You are right about the top box. I designed this piece so that each tier would be 3/4 scale compared the the lower one and carefully calculated all of the critical shape parameters for each tier. Apparently, I made a measuring error on the max diameter of the top box and got it slightly under size. By the way, there is some sort of optical illusion caused by the bright reflection on the sides of the finials that makes them look larger in the photos than they really are. Maybe John Lucas can explain that for us. Nevertheless, they could have been quite a bit slimmer.