Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Safety for beginners

Posts

Safety for beginners

#1

Steven Antonucci

Safety for beginners

steven antonucci

I teach a beginners class once per year at Peters Valley. In my class, I try to stress safe techniques and working methods, and usually we keep the blood down to small nicks here and there. I try to do it in a way that explains what will happen if you have to learn the hard way, but I also try to make it natural and not overly ominous.

Some of the very basic fundamental things we cover are never putting a finger in front of the tool rest, always touching the tool to the tool rest first, always dialing down the speed when you stop the lathe, and standing out of the line of fire with face protection on as a secondary/back-up.

Inevitably, someone will dial the lathe the wrong way and need a change of underwear. There is an instant or so of realization that the lathe is going to be going a lot faster than you want it to, so I walk around for two days trying to burn this into their DNA so that it becomes automatic.

There are a lot of things you can do wrong as a beginning turner, and the odds are that most beginners are doing more things wrong than they are right. Just looking at YouTube will confirm this to be the case. It is truly astounding that more people aren't hurt during the beginning phases of turning.

For those of you that teach beginner classes/students- what are your nuggets of wisdom and how you you burn it into your students DNA?

Steve

Re: Safety for beginners

#2

I like S. A. F. E. R.

GaryG in MD

One thing that makes this such a good acronym is that the individual components don't flow off the tongue, so you actually have to THINK about each one to recite it; hopefully, that gets the brain involved before that switch is thrown -- EVERY TIME if it's done right.

And now, I'm actually waiting for someone to post: "What's SAFER?"

...Gary

Re: Safety for beginners

#3

Re: I like S. A. F. E. R.

Guy Bratt

Ok. Whats S.A.F.E.R.

Re: Safety for beginners

#4

Re: I like S. A. F. E. R.

robo hippy

I do know about the "ABC" (anchor, bevel, and cut" of turning, but haven't heard of SAFER either.

robo hippy

Re: Safety for beginners

#5

Mike Stafford

Re: I like S. A. F. E. R.

Mike Stafford

S- Speed, check to make sure you have the speed set safely

A- Anchor the tool rest, banjo, live center and tail stock to make sure they will not move

F- Fasten, make sure the wood is securely fastened in the chuck or between centers or with a face plate

E- Eye protection, make sure to wear eye protection

R- Revolve the spindle before starting the lathe to make sure the wood will not hit anything while it is running.

I used to provide this Keith Rowley safety tip in written form to every class I taught now I just write it on a white board for all to see upon entering and discuss it on day one.

Re: Safety for beginners

#6

Re: I like S. A. F. E. R.

John Lucas

You must have smarter students than I have. :) The have trouble remember ABC, I doubt they would ever remember what SAFER stands for. Good people though, just don't seem to understand that if you poke a stick into a spinning piece of wood it will jump back at you unless it's on the tool rest.

Re: Safety for beginners

#7

Steven Antonucci

or that the flute face the inside of the bowl

steven antonucci

I hate talking in absolutes, since there is always an exception to the rule, but I try to teach my beginner class as absolutes because you can't break the rules until you understand them.

I agree that an absolute for beginners is the tool rest contact first, and yes, my class will usually have 2/8 students who try (unsuccessfully) to disprove this axiom.

I also try to make sure that people understand the purpose of the flute of a bowl gouge, and that it is turned toward the interior of the bowl when cutting inside the bowl. Inevitably, someone (or two, or three...) will get a mega-catch, and I will stop the class and make everyone come over to look at the giant swoosh and ask them why it happened. Occasionally, the offender will deny it. We bowl turn for one day, and I usually have to do this at least 2X (and give up after that)...

Way back in the day, when I was in college, I would go to a math class and they would put stuff on the board that I didn't understand (or needed a day or two to absorb). Right after that class, I would go to a physics class that used the same math that I didn't understand, so even if I understood the physics, I couldn't do the math. I would leave the physics class, and walk to an engineering class that used the physics... and such is woodturning.

Steve

Re: Safety for beginners

#8

Mike Stafford

Re: I like S. A. F. E. R.

Mike Stafford

I understand and agree with what you are saying but it incumbent upon us, those that teach to try and teach people as much about being safe as we can. I go through the exercise of demonstrating these techniques for safety the first demonstration in every class. Then we can progress on to proper tool presentation and so on and so forth.

I also have every member of every class sign a release which makes them responsible for their own actions. Woodturning is inherently a dangerous activity as several experienced turners who have had accidents in the last year or two have clearly demonstrated. But it is the responsibility of the teacher to try and impart some basic safety concepts and I feel I would be negligent if I did not do that.

The one thing I know for sure they haven't made a book with enough pages to list all the possible things you should not do while turning.

Re: Safety for beginners

#9

my version is slightly different...

GaryG in MD

Mike,

Thanks for putting it up for everyone to see.

First, it should be said that this is the mantra of which each letter needs to be remembered and honored every time BEFORE you start the lathe.

The version I use includes your "A=Anchor" items for the lathe parts within the generic "F=Fasten" reminder, which, for me, is for both lathe parts and wood parts.

My "A" is "Aside" -- stand Aside, out of the line of fire.

This is the letter that could have saved Lynne.

Although it isn't built in to the mantra, I also like to include and remember dust protection when I think about Eye protection.

Thanks for helping out. ...GG