Working with Mesquite
phillip medghalchi
I read Lynne's blog about what happened to her and I am sorry to hear it. I like to add this to those of you who do not, or do live in south of USA, and have access to Mesquite, or if you get it form a friend like me or someone who lives in south. Mesquite is very hard dense wood to work with and is forgiving for when you make any mistakes. It sands and finishes very nicely and it's preferred for inlaying with Turquoise and embellishments, however, I have learned that you need to inspect it very carefully and if you see any dark holes or any bug hole, In %98 of the time that dark almost black looking like or the bug hole goes all over the place inside the log. Lynne was very lucky who didn't sustain much worse injury that she did. In another thread I mentioned that recently one of our very good turner her in S. Texas had a 15" mesquite on the lathe and he was not sure about the tenon being form the sap wood and pucky and he left it running while he walked away form the lathe to get another tool on the way back the piece came undone and blew up hit the ground and bounced back up and hit his right side of his face to the point that he now has titanium plate on his right side of face.
i am writing this to scare anyone off, but to warn everyone that mesquite is attractive, hwo ever extreme caution is to be taken to inspect and work with it. this does not mean that there are other woods which may not act the same way. the most important thing is that try not to get distracted and please pay attention to the speed and hwo the piece is mounted on the lathe.



