Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

reading a log

Posts

reading a log

#1

Keith Tompkins

reading a log

Keith Tompkins

Hey, It's great taking a day off work!!! Thinking about reading a log, this image shows how a log end-grain section may appear, this one has three large cracks developing. I take advantage of this...and stay away from the cracks in the first place. Some turners try to trim the length until the cracks no longer appear, but there has been damage that may not be visible to the naked eye..."A" pieces could be bowl blanks, "B" pieces and end-grain hollowform, "C" spindle turning blanks. Ever wonder why a bowl blank cracked while turning or drying...the wood may have received damage before it went on the lathe. Reading a log is another way of avoiding having to test your faceshield.

Re: reading a log

#2

good point, Keith...

GaryG in MD

We need more of this kind of instruction as part of our Safety program.

I'll be talking about this at our next meeting. ...Gary

Re: reading a log

#3

Re: reading a log

Steve worcester

The other thing I have students look at is the distance between rings on either side of the bowl blank so you can better predict warpage. Even spacing with less defects will lead to even warpage on both sides of the bowl, peaking up and pointing towards the end grain in a side grain bowl

Re: reading a log

#4

Keith Tompkins

Re: reading a log

Keith Tompkins

reaction wood? Thanks, Steve

Re: reading a log

#5

Re: reading a log

Steve worcester

That would be the grain direction of the log shown.

I have a end cut from a log I sanded down to show the rings and talk about cuts and placements for shapes

Re: reading a log

#6

Re: reading a log

Bob Macgregor

I agree its a good point, and nice, clear diagram illustrating it. My only caveat would be that any twist in the tree growth pattern can mean that the extension of the cracks isn't straight along the trunk; it can twist as well, so cutting between the cracks can sometimes still catch part of the crack farther down inside the wood. Similarly, even in nice straight grain, a crack coming from the other end might be offset from the ones on this end and affect the stability of blanks extracted from inside.

Probably not a real big issue most of the time, but something else to be on the lookout for.

BOB