Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

I am very sad to report...

Posts

I am very sad to report...

#1

I am very sad to report...

GaryG in MD

that Lynne Yamaguchi has apparently had a very bad accident at the lathe.

www.lynneyamaguchi.com/wordpress/2012/09/28/an-accident/

We all need to keep her in our prayers.

It is also yet another reminder not to turn defective wood and to keep your face shields on as long as the lathe is spinning.

...Gary

Re: I am very sad to report...

#2

Re: I am very sad to report...

John Lucas

I'm very sad to hear that. Hope it all works out. Just the thought of surgery through the roof of your mouth should be enough to stop you from turning wood like that. This was a very experienced turner so I Know lack of skill wasn't the problem.

Please don't turn wood with cracks in it. If you do insist use strapping tape instead of duct tape. I won't break but it can come loose if you wrap it the wrong way. don't ask how I know that.

I use to turn a lot of suspect wood because I simply didn't know how to prevent wood from cracking and wanted to have something to turn. I used a lot of tape, epoxy, and even wrapped wired around some pieces. Not very smart and I was just plain lucky. I've since learned how to save my wood and have fewer checks. If I find one I don't try to repair or save it. I stick a chisel in it and pry it apart. I use what's left to make a smaller bowl or even something smaller like boxes. It's just not worth risking the injury.

Re: I am very sad to report...

#3

Re: I am very sad to report...

Dale Bonertz

I agree with being cautious with cracked or defective wood. I see an even bigger message of always wearing your face shield. We will never know in this instance but had her face shield been down maybe the damage would have been minimal.

Thanks for posting this and kudos to Lynne for sharing this experience. I hope all goes well with her recovery and that she gets back to turning soon. Be safe out there and please wear those face shields.

Re: I am very sad to report...

#4

Don Leydens

Re: I am very sad to report...

Don Leydens

She sounds like a very brave woman. My prayers and thoughts are with her.

Face shields anyone?

Re: I am very sad to report...

#5

she's in our thoughts and prayers

Greg Haugen

She's in our thoughts and prayers for a speedy recovery.

Re: I am very sad to report...

#6

Wish her the best

Mike Foster

That is really a story that takes your breath away. She is obviously a very experienced and skillful turner. She was doing every thing right except the fact that she was turning wood that she knew was defective. Not even a tool on the wood! It seems she will recover, but it sounds like it may be a long road. She is truly lucky that worse didn't happen. She did not say where she was standing when the piece blew up. Really scary.

Hopefully she will recover quickly and get back to turning. Her work deserves to continue.

I was just turning one of my off center minimal surface pieces mounted on the lathe with jig that wound up holding the wood further off the headstock than I would have liked. I turn these things when I am well rested and can pay undivided attention to what I am doing. I make sure I am out of the line of fire. Still, the potential for disaster exists. It is stories like Lynne's that keep me on my toes and alert.

Re: I am very sad to report...

#7

Re: I am very sad to report...

robo hippy

One of the most important safety lessons I have learned over the years is, STAND OUT OF THE LINE OF FIRE. I wish her well.

robo hippy

Re: I am very sad to report...

#8

That is why I give her kudos

Dale Bonertz

Mike,

I like hearing these stories not for the gory details but as you alluded to (keeps me on my toes and alert) the reminder for safety first.

I see so many poo poo face shields. I have witnessed first hand, having worked for ten years in wood window and door manufacturing, how even the cheap face shields have saved peoples faces and assisting in lessening potentially more harmful damage to oneself. Mind you I am not advocating the use a cheap face shield but they are still better than none. Twenty five years ago when I was in manufacturing that is all we had were cheap ones. By today's standards why not spend the forty bucks or so for a good one (cheap insurance). It still doesn't beat standing out of the line of fire but one never really knows where an errant piece may go.

I don't want to belabor the point but face shields work a lot better than some will give them credit for.

Re: I am very sad to report...

#9

Re: I am very sad to report...

walta

Don’t delude yourself if you are holding a tool that’s cutting you are in the line of fire. If not directly certainly after the first or second bounce.

Don’t delude yourself if a 40 pound bowl blank hits you in the head 5 ounce of face shield will not save you.

I for one have sworn off cracked and rotten wood no matter how beautiful.

The table saw injuries send 93,000 to the hospital but the lathe sends more to the morgue.

I do wish Lynne a speedy recovery.

Walta

Re: I am very sad to report...

#10

Dale Jablonski

Re: I am very sad to report...

Dale Jablonski

Very sobering comment from walta which I completely agree with. I count myself unfortunately as among the 93,000 and have experienced the undeniable split second of "oh $$#@" when a piece of wood comes off the lathe. While I wear my face shield at all times I freely admit if something big comes off not even my hard head will come out the winner. Prayers for Lynne for a speedy physical, emotional, and mental recovery.

Re: I am very sad to report...

#11

Scary! Best of luck to her.