Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

When a shop is

Posts

Re: When a shop is

#26

Keith - Now that is funny, it made me laugh.


Re: When a shop is

#27

Dan Jechura

Re: When a shop is

Dan Jechura

I built my garage 30 years ago. It had a place at the back for my shop. Ten years ago I add on to my shop. My garage is my shop and my shop is my garage. When one needs more room the shop gets smaller or the cars sit out side for a while. It will never be a studio.

Dan J.

Re: When a shop is

#28

What if you work in your house?

John Lucas

I'm setting up to do more burning and air brushing this winter so I can work in my house where it's warm instead of my shop/studio where it's cold. Do I set aside a corner and call it my studio? :)

Re: When a shop is

#29

Dick Hines

Re: What if you work in your house?

Dick Hines

I do all my turning in a "shop" that was a garage until I started turning. I took half of the garage for the "shop". The other half is still a garage because that's where I keep my motorcycle.

Re: When a shop is

#30

Re: What if you work in your house?

John Lucas

Me too but the motorcycle doesn't take up as much room as my table saw and router table. I have to move it everytime I use the miter saw and if I want in the cabinet that holds my saw blades and other stuff I have to move the bike. I can climb over it to turn on the compressor. There's gotta be a better way.

Re: When a shop is

#31

Re: When a shop is

charlie belden

If it contains anything with wheels and an engine (or battery powered drive motors)

it's a garage. (Note: chainsaws don't count)

If it has woodworking hand and power tools, stationary woodworking machines (one or more of the following: table saw, bandsaw, joiner, planer, drum sander, oscillating spindle sander, oscillating belt sander, mortising machine, router table, drill press, miter saw or SCMS), one or more work benches, along with a lot of wood EVERYWHERE it'll fit, a iight dusting of saw dust on everything and wood chips on the floor - then it's a shop.

If it has all the characteristics described above for a shop, but no dust or wood chips anywhere AND at least one sky light and one large window, preferably facing south, it's a studio.

Re: When a shop is

#32

Re: When a shop is

phillip medghalchi

That was an honest confession.

Re: When a shop is

#33

Re: What if you work in your house?

phillip medghalchi

John, you have take Molley's advise, it all depends on who you are talking to.

Re: When a shop is

#34

Re: What if you work in your house?

John Lucas

Your right. None of the famous collectors are after my work, only locals. So I guess I work in a garage. :)

Re: When a shop is

#35

I call mine a Therapy Room

Don Orr

It helps keep me sane, or at least reasonably so.

Re: When a shop is

#36

Betty Scarpino

Re: When a shop is

Betty Scarpino

Charlie, now I'm totally confused. I was getting the drift of what to call the space where I do my woodworking ... until I read your post. My shop/studio/garage is always dusty and usually full of shavings, but it has a skylight and a south-facing window .... so, should I call it a studio-shop? :\

Re: When a shop is

#37

Re: I call mine a Therapy Room

Lan Brady

Lot of good answers, but Don, you are the most accurate for me.

The new sign above the door will be "SRT". Stress Relief Therapy room.

Thanks, Lan

Re: When a shop is

#38

Re: When a shop is

Jennifer Indy.USA

Betty you saw mine in it's beginning stages. Cobwebs, laundry baskets full of scrap wood, curtains on the windows (they were there when I bought the place). Even with the full makeover I still find myself calling it the garage sometimes. Don't tell Clay that :)

Re: When a shop is

#39

Jim in Burlington Ont.

Re: When a shop is

Jim in River Oaks, Ont.

It's been called many things, from garage, to storage, from shop to my place, lately it's what ever it is, some people feel better with a title, I just like to make things and don't really care.

Take care,

Jim

Re: When a shop is

#40

I call mine a mess

Terry Scott

I call mine a mess but thats how I like it

How can you be creative if you vacuum 3 times a day and don't let the dust settle

OCD cannot be good for your health

At the end of the day I dont want to think about cleaning up ,Close the door and walk out its always the same looking each day

Re: When a shop is

#43

mine is more like a "should-io?

Henry (Raleigh NC)

as in - "I should have done this " on that piece. That came to me as I was trying to pronounce Charlie Shudio suggestion.

Henry