Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Axminster chucks and O'Donnell jaws

Posts

Axminster chucks and O'Donnell jaws

#1

Axminster chucks and O'Donnell jaws

Craig Daymon

I received the latest Lee Valley catalog a while back now and was interested in the low profile, direct threaded Axminster chucks. But I was disappointed they weren't listing the O'Donnell jaws I have so frequently seen used in the British Woodturning magazine and several books. Then I reread the catalog. Search for "Axminster" on their site and it will show all the Axminster stuff they have available and, YES, they do have the O'Donnell jaws.

These chucks seem very reasonably priced.

Anyone ordered one of these yet? Anyone using one? (And the jaws?) Just wondering if they prove as useful as they seem.

-Craig

Re: Axminster chucks and O'Donnell jaws

#2

Re: Axminster chucks and O'Donnell jaws

Mark

I am not sure about the jaws--but the chucks are great. The heaviest of any chuck I own--Oneway, Nova and Axminster. Great chuck at a great price. I have no connection to either company but the chucks are great. If you don't buy the largest chuck, get the extended key. The mini key is a joke--the price for the large one is high too. I'm satisfied for what I paid.

Re: Axminster chucks and O'Donnell jaws

#3

Re: Axminster chucks and O'Donnell jaws

Greg Haugen

There's one listed in the Classifieds.

The chucks are excellent. Quality and precision of a Vicmarc or Oneway at half the price. I've used one for a couple of months with gripper jaws as a dedicated chuck for a project. I do like the shorter key since it's easy to put in your pocket while turning. I've used the gripper jaws, but I know there are several turners who think the O'Donnnell jaws are the only jaws out there. Their go-to jaws.

I am narrowing my focus of turning and have decided to sell mine, the only reason I'm selling it is that the chucks don't come with woodworm screw and the ones offered, I'm not a fan of and I use the screws a lot so I'm getting another chuck with a good screw. If they had a good woodworm screw, there's no way I'd be selling it.

Re: Axminster chucks and O'Donnell jaws

#4

Re: Axminster chucks and O'Donnell jaws

Mike Foster

I two axminster chucks. Both are older models that aren't being made now. They continue to do the right thing regarding their jaw slides though. The Axminster is my favorite chuck because it is so easy to change jaws. I always buy a set of jaw slides with a set of jaws. This allows you to spin a set of jaws out, and spin in the new set without looking for the appropriate allen key, dropping screws in the shavings and taking 10-15 minutes to change jaws.

I have dovetail jaws, gripper jaws and Odonell jaws. They are all interchangeable between all axminster chucks. I like the Odonell jaws and use them frequently, but I use the others just as much. They all have their benefits and drawbacks.

I have considered getting one of the big Vicmarks or Oneways, but may just go with the big axminster as I like them so much. Don't think you can go wrong with them.

Re: Axminster chucks and O'Donnell jaws

#5

Re: Axminster chucks and O'Donnell jaws *LINK*

David Walser

The O'Donnell spigot jaws are showing up now on Lee Valley's website. Perhaps it was only a temporary problem.


Axminster O'Donnell Jaws

Re: Axminster chucks and O'Donnell jaws

#7

Re: Speaking of Axminster....Check out the new one

Mike Foster

Greg, that is a beauty. I think I may wind up with one. Stainless steel no less. The big Axminster I have was called the Precision chuck (I think) and has been out of production for a while. This chuck looks very similar. Cool thing is that all Asminster chucks are backwards compatible, so all my jaws and slides would work with it as well. Hard not to bite on this one. Will have to wait till it is carried by someone on this side of the pond.

Re: Axminster chucks and O'Donnell jaws

#8

Re: Axminster chucks and O'Donnell jaws

Craig Daymon

The O'Donnell jaws were on the site, just not in the catalog. The catalog does not show all the Axminster products Lee Valley is carrying. There is a sentence in the catalog stating to go to the website to see everything they have from Axminster.

-Craig

Re: Axminster chucks and O'Donnell jaws

#9

Not in the U.K. either, until November

Craig Daymon

Looks pretty slick, but it does say that it won't be available to anyone until November. Might just have to check the Lee Valley site in November to see if they have it. Or, call them now and tell them you're interested.

For what I'm working with now, it's probably overkill. Though it's nice to know I can get one of the others with the O'Donnells now and I can use the jaws if I get one of these chucks later.

-Craig

Re: Axminster chucks and O'Donnell jaws

#10

Steve Kubien

Re: Axminster chucks and O'Donnell jaws

Steve Kubien

I have an Axminster Goliath and the medium size as well (k10?). I was looking for a large chuck specifically for coring and the $140-ish price tag of the Goliath (plus jaws) sure beat Oneway, Vicmarc or Nova. I trade emails with Mike Foster about Axminster and decided to take a chance. I'm really glad I did.

My jaw selection includes the gripper (5"+ tenon capacity) the equivalent of #2's and the o'donnell jaws (which I have not used yet). My sole complaint is the key. It's not the most comfortable thing in the world and I will soon be modifying where it meets the hand.

Re: Axminster chucks and O'Donnell jaws

#11

Re: Axminster chucks and O'Donnell jaws

Michael Mocho

Another Axminster chuck is for sale on the Classified page- older model, 8 sets of jaws. Thanks.

Re: Axminster chucks and O'Donnell jaws

#12

Re: Axminster chucks and O'Donnell jaws

Peter Hyde

Greg I have the Goliath and modified the longer Oneway screw to fit the Mega Jaws.