Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Inexpensive, computer controlled lathe *LINK*

Posts

Inexpensive, computer controlled lathe *LINK*

#1

Inexpensive, computer controlled lathe *LINK*

Craig Daymon

Quick post. Check this out.


Arduino ontrolled lathe

Re: Inexpensive, computer controlled lathe *LINK*

#2

Cool Craig   thanks for posting


Re: Inexpensive, computer controlled lathe *LINK*

#3

Steven Antonucci

NY Maker Faire is next weekend

steven antonucci

Arduino is all over that place.

I brought a couple of small turnings and people asked me "How did you do that?"

All robots... not hand tools, but still a good time.

Steve

Re: Inexpensive, computer controlled lathe *LINK*

#4

Re: Inexpensive, computer controlled lathe

charlie belden

There was an article in the AAW San Jose Symposiums booklet on how to use a micro controller and stepper motors to do indexing for ornamental milling/turning. I believe the article was by Bill Ooms. A link to his website, which inclluded more details on his indexing set up was included. Hopefully, someone reading this thread can provide the link.

As the price of these little micro controllers keeps dropping, along with the price of stepper motors, which are what are used in this and similar set ups, and as the software to drive them becomes more available - often for free - repetative (and to me seemingly BORING) tasks can be taken over by micro controlled devices.

To some, this will seem a threat, a loss of the Human Element, the thing that makes turning, and The Crafts in general, special. To others, this can be a liberation from the tedious, the repetative, the mind numbing Over & Over & Over Again - freeing up the Creative, the Innovative, the ability to pursue a Wild Hare Idea that would be rejected out of hand because of the boring work necessary to make the idea a reality.

This gets back to the question - is it the concept or the means of execution that is most important? Of course, a concept that is never executed has little value except in the mind of the conceiver. Yet a bad idea, executed exquisitely has little value either. Somewhere between the two there's a balance. If the execution of a great idea can be accomplished more easily - say through the use of a machine - the result of an individual piece done this way can be indestinguishable from that done soley "by hand".

To me, it's coming up with the idea and then figuriing out the best/easiest way to take the idea and create the actual object that's the Value Added part of creating. To others, it may be the act of hand turning the idea that provides the value of the endeavor.

Until recently, when affordable, powerful, easy to use computers and user friendly software, now called "apps" have become available, working out an idea and actually making the idea a real object was constrained to pencil and paper and hours and hours of practice at the lathe. Computers and "apps" have helped. Now the means of turning an idea into an actual object with a minimum of physical grunt work has begun to arrive - laser and CNC engravers / carvers/ sculpting, 3D Printers are already here and becoming more accessible at lower and lower cost. And what's on the horizon promises to lower the barriers between concept andturning that concept into reality even more.

We live in interesting times - and things keep getting more and more interesting!

Re: Inexpensive, computer controlled lathe *LINK*

#5

Leo Cuellar

A little more on Arduino, *LINK*

Leo Cuellar

For those who may not be familiar with it. This is a great TED video on it.

The lathe project looks fascinating. I was contemplating adding a chain & gear driven setup to my lathe for this sort of thing.


Arduino on TED