Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Woodturning fundamentals

Posts

Woodturning fundamentals

#1

Woodturning fundamentals

John Lucas

I need some help. I am one of the writers for the new Woodturning fundamentals that you can receive if your an AAW member. It is an excellent publication with authors like

Nick Cook

Linda Ferber

Joe Herrmann

Kurt Hertzog

Beth Ireland

John Lucas

Keith Tompkins

Rob Wallace

Anyway my question is, do you have a fundamental skill that should be taught or a question you want answered. It's been so long since I've been a turning newbie that I have trouble remembering. Sure I do teach and have some ideas that come from that but I'm sure you have others.

As an example I will working on a video today on drilling on the lathe. I just take it for granted since I come from a long background of woodworking and machine working. However a new turner may not even know what a morse taper is and the possible dangers of drilling on the lathe.

Let me know and I'll make a list and pass it on to the other authors. If your an AAW member and haven't received an online copy go register. There might be some good information. In the latest issue I have a video on some tips on making my mirrors.

Re: Woodturning fundamentals

#2

Re: Woodturning fundamentals

John Kaner

John,

Drilling on the lathe is a great one. I was making my 8th or so handle, talon chuck with pin jaws, ext bed VS Jet 1014. Wood chucked and drill bit in tail stock chuck.

BAM! Broke a jaw off talon and was damn near beat to death by 16 inches of tigerwood maple.

Took talon apart and found a broken jaw slide. Ordered new slides and had to "dress" the scroll due to a dented area. So, new jaw slides and pin jaws...

Thus, I believe an article on drilling on the lathe would be beneficial and not just for me...

Re: Woodturning fundamentals

#3

Re: Woodturning fundamentals

Bill Noce in Northeast Ohio

John,

We all take it for granted when drilling on the lathe since wehave been doing it for years. Tell the basic steps you use when drill is in the tail stock. The speed of the lathe, holding the chuck so it don't spin, etc... These are things most of us do without thinking. Also what you do when using drill chuck in head stock like using a draw bar to hold drill chuck from spinning, etc.

Re: Woodturning fundamentals

#4

Re: Woodturning fundamentals

Nick Todd

Shear scraping.......

Re: Woodturning fundamentals

#5

Re: Woodturning fundamentals

John Lucas

John Yea that is an unsafe practice. I now use a table in my banjo to hold the work and the drill bit in the headstock. I'll put a photo up tonight I have to head out across town in a few minutes.

Re: Woodturning fundamentals

#6

Thanks Bill will do


Re: Woodturning fundamentals

#7

Re: Woodturning fundamentals

John Lucas

Nick I think I mention shear scraping in one of my videos but will have to go back and look. I know I haven't covered it extensively. For the Fundamentals magazine I need to keep it kind of short but I've seen some scary scraping techniques. I'll try to do one.

Re: Woodturning fundamentals

#8

Vibration

jake Niedling

John,

You might want to consider a topic on vibration. I am thinking mostly about wood movement/flexing against the tool rather than from the the machine itself. Include what causes it and how to reduce or eliminate it.

Jake

Re: Woodturning fundamentals

#9

Just turn MDF- no vibration   See you Saturday


Re: Woodturning fundamentals

#10

You coming all that way to see my Demo?

jake Niedling

Look forward to seeing you Saturday. I told Tri-state that I didn't even know which end of the tool to hold. They told me that they didn't believe me based upon what someone had told them. I sure hope I live up to the story you gave them about me. :D Thanks!!

Re: Woodturning fundamentals

#11

Re: Woodturning fundamentals

phillip medghalchi

John, you can go back on this forum and look at the qsn.s being raised and the answers the more advance turners have shared with the newbies. I for example only started to venture more seriously about turning around Feb. of last year and ever since there have been many a qsns. I have raised in many a forums or have asked my fellow club members to help me. I myself were thinking of starting to document step by step progress of my turnings and the problems and trivial I run into and perhaps someday it can help someone who is new or even considering getting started into this hobby. I have noticed that as much as we emphasize on safety since there are no regulatory body on the you tube many and way too many turners video too many scary videos and violating the fundamental safety procedures.

I have noticed that great many of demonstrators are really showing the demo for getting the audience to buy their products and they harp on that a lot. I hardly see anyone teaching the fundamentals of design and why a piece of work which they have created came out the way it did. I am sure as designer of those pieces they don't think twice about what they do since it comes natural to them. However, there are many factors that are involved in making an article of wood that is also attractive and artistic.

I like to suggest that if you could write about whys and hows of what it takes to create a piece of art, I am sure you know it's not hard to teach anyone to turn something crappy, however, artistic and esthetically pleasing you have to have the creativity.

For example it took me a long time to envision or see beyond a log to figure out how the orientation and the cut will influence the final design and I am a still learning. It's not just sawing the log in the middle right on the pith and then putting it flat on the band saw and hope that at the end the orientation of the grain or the run of the growth ring will fall in the right place, and the proof is my latest thread about my walnut hollowing form which I think it's going to have to be tossed. Again, part of learning and I took that upon myself to learn, without someone telling me that you need to cut the log here, or there. these kind of fundamentals are important to help the newbies to move in the right direction.

Re: Woodturning fundamentals

#12

John Jordan video *LINK*

John Lucas

I strongly suggest getting John Jordan's DVD on the The Aesthetics of wood and wood movement. It will answer most of the questions you just brought up.


http://johnjordanwoodturning.com/John_Jordan_Woodturning/DVD.html

Re: Woodturning fundamentals

#13

Re: John Jordan video

Don in Central Illinois

When I wzs off work from back surgery, someone loaned me this video. I was impressed enough I bought my own copy. Excellent DVD?

Re: Woodturning fundamentals

#14

Re: John Jordan video

John Jordan

Thanks, cousins. :D There are a couple of related articles on the website that are free, too.

John

Re: Woodturning fundamentals

#15

Re: Woodturning fundamentals

charlie belden

On "rolling cuts" you want your thumb on the handle to END the cut pointing up. So for a Left Rolling Cut, you want your thumb to be pointing to the right at the beginning of the cut. For a Right Rolling Cut, you want your thumb pointing left at the beginning of the cut. This End With Your Thumb Pointing Up seems to keep me from over rolling - and getting a catch at the end of the roll. Works with spindle and bowl gouges but especially with bedans and skews.

I think I got this tip from a Keith Rowley VHS tape (remeber VHS tapes - from the Pre-Digital Era?)