Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Rethinking The Priddle Wood Vaporizer

Posts

Rethinking The Priddle Wood Vaporizer

#1

Rethinking The Priddle Wood Vaporizer

charlie belden

Graeme Priddle's DIY Wood Vaporizer is a great tool that can be built without spending a chunk of change. The one improvement needed is a pressure sensitive On/Off contact switch, or at least an On/Off contact button on the handle near the tip. Positioning the wire right where you want it THEN applying the heat would give better placement control - BEFORE the F L A S H ! I suspect Radio Shack has such a switch that would handle the 1 to 2 amp current.

Anyone made this modification to their vaporizer? If so care to share specifics and How To?

Re: Rethinking The Priddle Wood Vaporizer

#2

Re: Rethinking The Priddle Wood Vaporizer

Michael Mocho

Graeme helped me convert an old and rather powerful battery charger into a burner when he stayed here last summer (before we went on a 12 day river trip in Utah). I was curious about using the variable speed pedal from my Foredom flex-shaft tool with the burner, and discovered it can really add some zing! You can vary the depth of the burn depending on how long you 'goose' the pedal. Dims the lights a bit, but seems to work.

Not sure you could find a switch that was heavy enough to handle the current and still fit on a hand piece - heat can be a problem if it is where you don't want it.

-M

Re: Rethinking The Priddle Wood Vaporizer

#3

Dennis in Southern Oregon

Re: Rethinking The Priddle Wood Vaporizer

Dennis in Southern Oregon

Charley, are you proposing to switch the 120V input, or the low-voltage output of the battery charger? If the former, it sounds like a klugey wiring situation; if the latter, the current will be far more than 2 amps and you will need a heavy-duty switch. I believe the Priddle unit is intended to develop 100 watts or more; assuming a typical 14 V output for the battery charger, this means more than 7 amps of current. If you have access to an ac ammeter you might want to check this out. :\

Dennis

Re: Rethinking The Priddle Wood Vaporizer

#4

Re: Rethinking The Priddle Wood Vaporizer

Galen Vetterick

Now that you bring it up I guess I will try one of my foot operated switches on the AC side. Not sure I want to worry about keeping my finger on a switch and trying to move the pen to burn. I need a better shaped pen as the one I made it pretty tough to use for details.

Re: Rethinking The Priddle Wood Vaporizer

#5

Re: Rethinking The Priddle Wood Vaporizer

Dale Miner

Typically, the amp gauge on the charger I use reads somewhere in the 6 to 8 amp range, and sometimes a bit over that. Another thing to consider is the output from the charger is DC, and switches for DC are usally larger and more complicated that switches for AC. DC current has more of a tendency to arc when the contact is broken. Consequently, the contacts are usually larger with a snap open feature to help stop the arcing.

Foot pedal on the AC line sounds interesting.

Re: Rethinking The Priddle Wood Vaporizer

#6

Re: Rethinking The Priddle Wood Vaporizer

Graeme Priddle

Good morning all:) Graeme here.

Ellis gave me the heads up that there was some woodburner discussion going on so I thought I'd put in my 2c's worth.

Howzit Michael, the foredom pedal is a great idea!!!!

Charlie, as Denis mentioned you'd need a switch capable of carrying at least 10-15 amps on the 12v side and there could be arcing problems which you would need a hefty capacitor to overcome and it would all probably be pretty cumbersome. Control on the 110v side is much easier and cheaper.

It's not something I would consider as I want my tip to be glowing orange hot all the time so I can work faster, if you are switching off and on between brands there is a heat recovery time that will slow down working time.

In the 10 years I have been playing with woodburners the handpieces are the biggest problem, most get way too hot to handle with constant use and I have been through a lot of trial and error development to get to a easy to use handpiece that doesn't get too hot. The one I am making now seems good, still gets pretty warm but not to an uncomfortable level. I've made and sold a bunch of these over the last coupla years and haven't had any negative feedback yet:)

On another note for those that are interested in building a burner the NAPA 85-220 battery charger I have favoured in the past has been discontinued by NAPA:(:( but the 85-437 works fine but you gotta rip out all the electronic bits and it costs a bit more but still cheaper than commercial units and way more bang for your buck:)

Will try and keep an eye on this thread but on the road in France right now so if you need any more info you can e me direct at graemepriddle@xtra.co.nz

Happy burning!

Cheers

Graeme

Re: Rethinking The Priddle Wood Vaporizer

#7

Re: Rethinking The Priddle Wood Vaporizer

dick gerard

How much is the handpiece you are currently making? Do you have a picture posted anywhere?

Re: Rethinking The Priddle Wood Vaporizer

#8

Re: Rethinking The Priddle Wood Vaporizer

Jennifer Indy.USA

Michael,

I can't even use the Foredom pedal for it's intended use! I start using that thing and the next thing you know I'm doing 100MPH (kinda like my driving) and my piece is screwed up! I can only imagine what danger it would pose to me if I had a red hot hand piece on the other end. I have to use a table top speed control.

I was bummed we missed you when you were here at MASW a few weeks ago :( Clay was at Emma and I was working in the middle of the night and sleeping during the day. I'm not a good owl. That has now come to an end though. I'm back to normal so to speak. Hope you had a good week. I'm at MASW all week this week teaching a bowl class. Looking forward to being away from work! Let's make sure our paths cross next time you're here!

Jen :)

Re: Rethinking The Priddle Wood Vaporizer

#9

Re: Rethinking The Priddle Wood Vaporizer

Graeme Priddle

Hi Dick, sorry for slow reply:( I've emailed you direct with with info/price on my handpieces. Will have info up on my website www.graemepriddle.com as soon as my website helper gets back from holiday.

Cheers

Graeme