Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Finishing Qsn.

Posts

Finishing Qsn.

#1

Finishing Qsn.

phillip medghalchi

I was looking at Ross Fairfield articles about secret to finishing, I wonder that if he originally published those in 96-97, do those techniques still hold with today's finishes or even his home made finishes? Can folks on this forum who have been around when Ross was around and experimented with his finishes and also tried the newer ones made recently to help me out please?

I have had good results with General's salad bowl finishes and my colleagues were pleased with my finishes, however, since I am new at turning and have some pieces which are not utilitarian and put the Mylands friction polish on them, somehow I am not satisfied with the result. of course, I followed the direction on the bottle exactly and somehow still get some round streaks on the finish. or do you guys not use Mylands for your bowls and only on the pens and bottle stoppers? I try to post some pic.s to illustrate my qsn.

I like the idea the he was saying if a piece is for utlititarain use then do not put any finish on the inside which make sense, so if you try to sell it you don't have to give half an hour sales pitch about the food safe finish inside the bowl.

What say you?

Re: Finishing Qsn.

#2

Jim in Burlington Ont.

Russ's Guidance

Jim in River Oaks, Ont.

Russ was a very influential person in my turning development, he shared openly what he evaluated in finishes as with many other details in turning. To this day I still follow many of his principles in my own turning process.

He has been missed greatly since his passing, we are at a loss for his absence but blessed to have had him guide many of us through the mirage of details so that we could become better turners at every step of our own processes.

If you don't have his DVDs you should get them, I have the full set and watch them more often than most others. The learning continues.

Double Thumbs Up on his methods and they are timeless, yes, they are current.

Take care,

Jim

Re: Finishing Qsn.

#3

Re: Russ's Guidance

Barry L Elder

What Jim said!

Re: Finishing Qsn.

#4

Re: Finishing Qsn.

phillip medghalchi

I may need to rephrase my qsn., that Ross's techniques are no in qsn., but the new chemicals for the wood turning are what I have qsn. about. I am sure he spent days and countless hours to develop what he did, however, the confusion is about all these water based finishes and all the new stuff.

Re: Finishing Qsn.

#5

Re: Finishing Qsn.

Carole Valentine

Russ understood finishing...the chemistry and the techniques. The information he shared is timeless. At the time of his his passing, he was still not a big fan of the waterborn finishes but he thought they were improving with time. I miss the old self-proclaimed curmudgeon...he taught me a lot. The answer to your question is yes, all that information is still very valid.

Re: Finishing Qsn.

#6

Re: Finishing Qsn.

Don Lennon

I met a grandson of Russ last night. Russ's wife has moved to Squimm in puget sound.

He had several of his turnings. and thought highly of him. and spoke to others in the group about

his work. Just quiet thoughts.

Don

Re: Finishing Qsn.

#7

Re: Finishing Qsn.

mjonesrdg

What you are turning, how it is to be used, and the wood specie is very important to choosing your finish. Friction polish would be at the bottom of the list for finishing bowls. Your streaks are the results of lack of flow of the liquefied shellac. It works fine on smaller objects. I've been using Crystalac grain filler (water born) and like it, but typically put another finish on top.

Russ's articles are a Godsend.

Re: Finishing Qsn.

#8

Re: Finishing Qsn.

phillip medghalchi

Thanks everyone for your input, although by the time I got started in turning I missed knowing him in person. He passed on and our community sure will miss him and his talent. I have heard great deal about him and I don't have any doubt about his ability in turning and he indeed passed on wealth of knowledge to this trade. I am just learning like any other new turner would and I am understanding that turning a bowl to shape is only 25% of the whole process and if one didn't know how to sand and finish the article you might as well count that you one just playing with wood not really creating anything, just like in wood working I find there are many good makers, but when it comes to finishing the project their finishing technique really diminish what they have done for hours. so, I am striving to master the last leg of the art of turning.

Appreciate all your help.

Re: Finishing Qsn.

#9

Keith Tompkins

Re: Finishing Qsn.

Keith Tompkins

HI Phillip, welcome aboard. Just want to say...there are no easy shortcuts. I especially dislike the friction finishes. They look good initially, but the finish doesn't hold up. Many finishes, such as Russ describes, will, and have , stood the test of time. Go with his suggestions...Keith

Re: Finishing Qsn.

#10

A finish that didn't exist when.....

JamieDonaldson

...Russ was still alive has become one of my favorites, General Finishes Woodturners Finish. It is among the newest generation of water based finishes, and has overcome most of the negatives that I had about prior water based finishes, and I think Russ would have liked it as well. ;)