Working on my straw house box
John Lucas
I got both the boxes turned for the stick and straw houses. Now I'm working on now to build them. The first problem with the straw house was the straw and how to cut it. I purchased a small broom and cut off long strands. Cutting it into small pieces made the pieces fly all over. I grabbed a piece of metal scrap and stuck the straw into the "pipe" and cut it to length. This kept most of the straw contained so I could find it.
Then came how to apply it to the box. I decided on sticking it down to blue painters tape. I counted a little and it takes about 25 per inch and a little over 8 1/4" to wrap around the box. I got really good with my tweezers. Then I painted Contact cement onto the straw and the box and then simply rolled the box over the straw.
Here's a shot of those steps and the box so far. 










