Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Tried to turn my Chuck

Posts

Tried to turn my Chuck

#1

Tried to turn my Chuck 

John Lucas

I got in a hurry turning a small knob and got a kick back. It spiraled my Sorby Skew into the chuck. As you can see from the photo the chuck is definitely softer than the skew. In fact it really did very little damage to the skew. Will probably just take a few passes on the grinder to get rid of the very small ding.

A file test on both the chuck and skew verify that the skew is a lot harder metal. Anyway the damage on the chuck has been filed down and now I don't have a really clean corner on that jaw. OH well. Back to work.

Re: Tried to turn my Chuck

#2

John..you shouldn't be telling us.....

jake Niedling

that you do the things that many of us have done. I often find myself turning to close to the chuck, trying to get the most out of that piece of wood. Usally for ornaments and boxes. When everything goes as planned no problem, but really isn't a safe procedure. Like you said, get in a hurry or lose the bevel adnd the tool skates off or catches. I think as we develop confidence in using our tools, we also take more risks such as working too close to the chuck. Thanks for sharing.

Re: Tried to turn my Chuck

#3

Mike Stafford

Re: Tried to turn my Chuck

Mike Stafford

Never done that with a skew but there are probably a few other tools that may have accidentally encountered a chuck jaw.....but that was a long time ago..... :(

Re: Tried to turn my Chuck

#4

Re: Tried to turn my Chuck

robo hippy

John,

Don't worry about the grinder. Clamp 1 or 2 business cards between the slots, and turn it out with your scrapers, a Thompson is preferred. One of the Aussie turners said to do that. Be gentle, you can't hog it off, but it does work for truing one up and removing some dings.

robo hippy

Re: Tried to turn my Chuck

#5

Re: Tried to turn my Chuck

Barry L Elder

Been there! Done that! Quite a surprise! :(

Re: Tried to turn my Chuck

#6

At least you didn't...

Bill Howatt

break a 12" rest like I did. I had a scraper slightly above the rest, hit the chuck which slammed it down onto the rest. I have a new one and a Oneway jaw with a nick in it.

Bill

Re: Tried to turn my Chuck

#7

Re: Tried to turn my Chuck

Don Orr

There was an article in American Woodturner several issues back by, I believe, Terry Martin abot re-truing chuck jaws as Robo said. I will NOT show what my jaws look like. :\ :D ;)