Small scoops
Leo Cuellar
Here's a little project I've been playing with that I thought I would share before summer is completely over. These scoops are sized for pouring your favorite beverage crystals from the economy sized container, into a sports bottle or similar container for tagalong refreshment.
I was having a real hard time trying to get a smooth surface on the inside of the back end. After trying normal techniques, I tried a ball end mill cutter which worked better but still not great. Building a real small "bowl" steady helped some more, but still not quite enough. After listening to what John, Mike & others have had to say, I finally broke down and bought a Hunter #3, as this seemed like the perfect rationalization for another tool acquisition. It took a little bit of trial & error, but I'm impressed with what this tool is capable of. I can only imagine what it can do in capable hands.
I finally settled on 3M radial bristles to deal with the interior surfaces that I haven't been able to finesse with technique.
These are actually a fun shape to turn. The handles could be longer if one wanted, but these were sized to live in the container, otherwise I'd lose track of them. The end ones are birch and the center is curly maple all cut from 4/4 stock. I think these will end up with just a shellac finish. Thanks for looking & have a great day!






