Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Am. Maple Platter

Posts

Am. Maple Platter

#1

Don Leydens

Am. Maple Platter

Don Leydens


After seeing a demo by Doug Fisher, I wanted to give his vacuum chucking system a try. I'm no Doug Fisher, but really had some fun with this. It's 11.5" x 1" thick. Finished with Tung Oil and buffed. A fellow woodturner bought this before the finish was on so I hope he likes it even better now.

Thanks for looking and all comments are more than welcome.

Don

Re: Am. Maple Platter

#2

Very nice!

David Walser

Don,

That's very nice. I like the decoration you've added to the rim. I think it enhances, rather than competes with or covers up, the beauty of the wood. Very well done.

Re: Am. Maple Platter

#3

Leo Cuellar

Re: Am. Maple Platter

Leo Cuellar

I love it, Don. The way you darkened the center really makes the rim detail pop, but my eyes keep getting drawn back to the center :)

Re: Am. Maple Platter

#4

Bob Moffett

Re: Am. Maple Platter

Bob Moffett

I have actually seen this platter and it is as OUTSTANDING as all of Don's work.

Re: Am. Maple Platter

#5

Joe Bradshaw

Re: Am. Maple Platter

Joe Bradshaw

Don, why didn't you show this to me on Sunday while I was at your house. It's great looking.

Re: Am. Maple Platter

#6

Don Leydens

Re: Am. Maple Platter

Don Leydens

Thank you very much gentlemen, I appreciate the kind comments.

Don

Re: Am. Maple Platter

#7

Re: Am. Maple Platter

Roger Chandler

That is a beautiful piece........fit for display in any setting! Did you use a multi-axis hold to do the rings on the rim? Super color and the texturing is tasteful, not overdone.

Re: Am. Maple Platter

#8

Don Leydens

Re: Am. Maple Platter

Don Leydens

The rings where made while the piece was offset vacuum chucked from the back (bottom).

Re: Am. Maple Platter

#9

Re: Am. Maple Platter

Vince Welch

Very nice piece indeed!!! What did you use for the texturing...the Sorby tool? Again very nice!!! Vince

Re: Am. Maple Platter

#10

Re: Am. Maple Platter

matt overton

Don, If I haven't already told you, I love your work! Is Doug's vacuum method much different than a plain vac system?

Re: Am. Maple Platter

#11

Don Leydens

Re: Am. Maple Platter

Don Leydens

Thank you for the kind comments.

Yes Vince, it was the Sorby Texturing Tool moved in a random but firm sweeping motion. Thanks for asking, Don

Re: Am. Maple Platter

#12

Don Leydens

Re: Am. Maple Platter

Don Leydens

Hi Matt!

Maybe calling it "Doug's System" was a bad choice of words. Basically it's a good ole vacuum chuck that holds the bottom of the piece while designing the front. Because the back of the piece is rounded, you can move it all over the place in the vacuum chuck and not only get offset shapes, but the depth angles will vary as well. A ton of fun to play with!

Thanks for asking,

Don

Re: Am. Maple Platter

#13

Very nicely done!


Re: Am. Maple Platter

#14

Re: Am. Maple Platter

John Lucas

Don I love the finish. The lighter middle really sets it off.