Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Giving Back

Posts

Giving Back

#1

Giving Back

Jeff Willaford

I appreciate the risks and sacrifices the men and women of the military have made over the years. Once in a while I get to thank one of them for their service and to give them one of these pens. I used .308 brass and an actual bullet. The cartridge and bullet are then polished and powder coated with a clear gloss. Definitely not an original design but it's my way of giving back a little.


Re: Giving Back

#2

Mike Stafford

Good job for deserving people!


Re: Giving Back

#3

Jim in Burlington Ont.

Re: Giving Back

Jim in River Oaks, Ont.

Nicely done Jeff,

It is a wonderful feeling to give back, well done,

Take care,

Jim

Re: Giving Back

#4

Strong work-well done!


Re: Giving Back

#5

Don Leydens

Re: Strong work-well done!

Don Leydens

Well done, Jeff! They're going to LOVE the pens. You seem very good at turning acrylics, what do you use to shape them? A big salute to you!

Re: Giving Back

#6

Leo Cuellar

Very nice!


Re: Giving Back

#7

Dick Hines

Re: Giving Back

Dick Hines

Good for you Jeff. Those people need all the at- o-boys they can get.

Re: Giving Back

#8

Re: Strong work-well done!

Jeff Willaford

Thanks, Don. I use a Myron Curtis style drop nose scraper for rounding off and for the basic shape with acrylics. The final turning is done with a skew...same as with wood blanks but ribbons come off rather than chips.

Re: Giving Back

#9

Thanks all - for the kind words and support


Re: Giving Back

#10

Don Leydens

Re: Strong work-well done!

Don Leydens

Thank you Jeff. I'll have to try that. I have a s*&% load of acrylic blanks I pretty much gave up on because of chipping. I'll give them another shot with the scraper/skew method.

Thanks again,

Don