Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

more chainsaws

Posts

more chainsaws

#1

more  chainsaws

jim 9 miles

Ok, I've read all the posts a few days ago- and I promise- no more low octane ethanol gas!

However, I still have a chainsaw that has sat for 6 months with it in it and it won't start.

What do our saw mechanics reccommend to get it running? Thanks!

Re: more chainsaws

#2

Jesper, Denmark

Re: more  chainsaws

Jesper, Denmark

Dump the old gas, mix new batch. Do not use excess oil in the mix. 50:1 is currently the best recommendation - even if the saw is old enough to have a higher oil content originally specified.

Clean the air filter.

Clean the spark plug - use gas and an old tothbrush, NOT a wire brush. Don't use excess force in screwing in the spark pug. Hand tight plus 1/8th turn should do it.

Re: more chainsaws

#3

Re: more  chainsaws

waltben

And if that doesn't work, remove, disassemble & thoroughly soak & clean the carburetor. Last step is to replace same. I've had to do this on a weed whacker and a generator. Doesn't seem to matter 2 or 4 stroke, ethanol gasoline just isn't good left in small engines that aren't used a lot.

Re: more chainsaws

#4

It's not -just- the ethenol

Ralph Lindberg

All the additives in "modern" gas also help with trashing carb and gumming up the works.

Used to be that "gas" would last forever, today, eh, without adding in even more additives, maybe 30 days.

Re: more chainsaws

#5

Re: more  chainsaws

Bob Conrad

Jim

Try giving it a squirt of Cyclo Break-Away. That's what my saw mechanic uses.

Re: more chainsaws

#6

Re: more  chainsaws

Lan Brady

Bob,

Is that a tank addative or spray ti down the throat of the carb?

Lan

Re: more chainsaws

#7

Re: more  chainsaws

Bob Conrad

Spray it in the carb. I have a hard starting Sthil, Took it to the dealer &

that's what he used. Seems to work better than starting fluid.

Good luck.

Bob

Re: more chainsaws

#8

Re: more  chainsaws

Lan Brady

Thanks much.

I have poulan blower that tries to start, but just cant do it.