It's beginning to look a lot like Christmas....
Phil Stivers
Inspired by the technique of Ron Brown these hollow ornaments are approximately 8" tall, 2 1/4" diameter, and weigh 1.5oz.

Knowledge You Can Build On — Est. 1998
It's beginning to look a lot like Christmas....
Phil Stivers
Inspired by the technique of Ron Brown these hollow ornaments are approximately 8" tall, 2 1/4" diameter, and weigh 1.5oz.

VERY nice!
Re: It's beginning to look a lot like Christmas...
walshjp17
Outstanding! What finish do you use?
Re: It's beginning to look a lot like Christmas...
Carol
Have fun at your demo Saturday. Wish I could be there.
Beautiful work!
Re: It's beginning to look a lot like Christmas...
Jim Rutten
Can we get a close up on the two painted ones and whether or not you painted them?
Very Nice and well done!!!
Re: It's beginning to look a lot like Christmas...
Phil Stivers
I'll post the painted ones. My wife is the painter of record.
Re: It's beginning to look a lot like Christmas...
Phil Stivers
Miss you. Try and stay out of trouble.
Re: It's beginning to look a lot like Christmas...
Phil Stivers
Finish on globes is approx 6 coats of Minwax Polycrylic (water based poly). Sanded smooth after three then recoated for three more. Final sand is to 12000 grit with micro mesh abrasive. Rub out is a four step process with Maguiars #1, 2, 9, & 7 (in that order) automotive polish system.
Finish on icicles is Deft high gloss rattle can spray lacquer (approx 6 coats). Finish process talks two days and I do it in batches.
Re: It's beginning to look a lot like Christmas...
Carol
Trouble? Moi? Surely you jest!
Re: It's beginning to look a lot like Christmas...
Jim Breeden
BEE-UUUU-T-FUUUUL !!! 
Re: It's beginning to look a lot like Christmas...
Phil Stivers
The painted ornaments.....




Thanks to all for your encouragement.
very nice work
They all look like family heirlooms
Where did you get the ornament stand?
Re: Where did you get the ornament stand?
Phil Stivers
I bought them at the Tall Mouse craft store a couple of years ago. Haven't been able to find them like that since. Still looking. Amazon has some, but the diameter of the wire is larger.
Single and Triple stands are available on Amazon.
Re: Where did you get the ornament stand? *LINK*
Mike Stafford
I buy the wire hangers from Bard's and make my own wooden base. This company will sell you just the wire hanger section if you buy it in quantity.
They sell three sizes 4", 5" and 6" which are large enough for the ornaments I turn. They also sell and extensive variety of other ornament stands.
Here is the link to one page of 5 displaying their wares.
Ornament stands