Non-art, practical turning
Mike Foster
I took a break from art stuff to do some practical turning. The picture here is a drop spindle that my wife has been after me to turn. It is about 10 inches long and has spiral grooves in 2 opposite directions that catch the fiber and allow the spinner to spin the fiber. Opposite direction is used to spin the fiber in the other direction (I'm not sure why). The caps are fit to a press fit and need to be secure as the cap is left on the bottom to protect the hook when the fibers break and the spindle hits the floor (it happened 3 times while getting this picture). Wood is ebony for the caps and what I was told is orange agate wood but smells and acts like bloodwood. i got this wood from one of Jim Kings friends and coworker who was up from Iquitos, Peru to disassemble a barn size kiln here in Vermont, and ship it to Peru. He brought a bunch of wood up with him, and Brad Vietje and I met with him and he just gave it to us. Nice.
The picture below shows a rattle I just turned for the our first grandchild that is due any day now. It is loosely based on the rattle that Joe Larese showed in a recent AAW article. He turned 2 boxes for the rattles and I thought that was too much trouble and just hollowed 2 spheres and turned the spindle to fit. A few beans and whala.




