Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Demo Suprises

Posts

Demo Suprises

#1

Demo Suprises

Nick Todd

I did a Bowl demo for a woodworking club last nite. Just before the meeting started I was told that I I would only have thirty menutes for the demo. It was a suprise. I don't turn enough to turn quickly in my own shop let alone in front of a group of people.

I guess the first lesson is set expectations in writting before agreeing to do the demo.

Luckily, I had prepared enough partially turned blanks to skip some of the turning of the inside of the bowl. And I streched the time enough to cover all of the steps that I wanted to. The demo went well otherwise.

What suprises have some of you ran into?

Nick

Re: Demo Suprises

#2

Mike Stafford

Re: Demo Suprises

Mike Stafford

I once showed up for a demo at a club only to find another demonstrator setting up at the lathe. The club member who made the request for me to demo forgot.....

Re: Demo Suprises

#3

Re: Demo Suprises

Dale Miner

So, you now know how the group felt that was upstaged by Jake and Elwood.

Re: Demo Suprises

#4

Re: Demo Suprises

Steve worcester

It is just bad planning on the clubs part when that happens. Even if you are paid, say $100, it is poor planning on the clubs part that you don't get to do your "full routine".

The demonstrator, of any level, makes a commitment to be there in, at the MINIMUM, time, and to not get at least a precommitted allotment, I would be upset.

Re: Demo Suprises

#5

Betty Scarpino

Re: Demo Suprises

Betty Scarpino

Many years ago at a woodworking store that sold lathes and woodturning equipment, as I was preparing for my demonstration, I realized the lathe was running in reverse. (I always test out the lathe well in advance.)

This lathe did not have reverse mode. The first solution offered by one of the salesmen was to turn the lathe around and use it from the back side .....

Twenty minutes later, they had the motor rewrired correctly and I could do my demonstration.

Re: Demo Suprises

#6

Steven Antonucci

Surprises?  Or is it me?

Steven Antonucci

I've demoed at my local clubs, and I thought I had a pretty good understanding of how long something could take and what I need to say about it. It's funny how 50 guys can ask you questions you never thought about and completely set you off schedule :D

When I travel, I assume that I will need EVERYTHING (except a lathe). In my head, I schedule for about 2/3rds of the allotted time of the demo for me, and the other 1/3rd for the audience to fill in. I always start my demo by stressing that the goal is to show the steps and processes, not to turn a finished piece- that way, I am not accountable for producing the final, expertly turned work that some people may be able to produce in an indefinite timeframe (like the time between club business and folding the chairs back up...)

As for surprises... I am always amazed by what people are amazed by.

Steve

Re: Demo Suprises

#7

Rob Wallace

Re: Demo Suprises

Rob Wallace

I was once asked to come and do a multi-part demonstration, and confirmed with the 'invite-er'/host person that there would be a video system in use during my demos, and that close-up views would be possible.

When I arrived and was getting set-up at the lathe, I was informed that for whatever reason (I never found out why), it was not possible to use the camera system, and obviously there would be no close-ups to show what I was doing. This put a major dent in what and how I could show the techniques and other information I wanted the audience to see, and thus severely reduced how effective I was as a demonstrator. Unfair to both the demonstrator and the audience.

Most of my demos include use of a laptop and Powerpoint to teach the method and science behind the topic using images, graphs, diagrams, and other examples, to supplement and expand the learning for the on-lathe part of the demonstration. Sometimes there have been problems switching between a laptop and camera video source.

A major detracting element in many demo situations (even at Symposiums) has been the 'washing-out' of the projection screen by the room lights where the video projector's intensity isn't enough to overcome the ambient lighting, reducing contrast and image quality dramatically. Not a major problem perhaps, but something that should be considered to improve the audience's learning experience. Having the ability to turn down room lights while maintaining enough light for the demonstrator & cameras would be a real plus.

Rob Wallace

Re: Demo Suprises

#8

Re: Demo Suprises

Thomas Stegall

Last year I was invited to do a demo at S.O.F.A. Chicago (Sculptural Objects and Functional Art) which I'm told is now the world's largest art show. The demo was in the booth co-sponsored by CWA and the AAW. As the demonstrators were all professionals except for me (and I have been turning for only 3 years), the invitation was a surprize in itself. Then the director of the department where I work, and who I've never seen eye to eye with heard about my demo through the grapevine. She sent a mass e-mail announcing it to the entire agency, and then showed up to the demo to watch. After my demo she asked to have her picture taken with me? Then one of the demonstrators cancelled and I was asked to do a second demonstration later.

All of this happened as my very first time ever doing a demonstration. One demo, many surprises!

Re: Demo Suprises

#9

Brad Vietje

Re: Demo Suprises

Brad Vietje

I did a demo about 6 years ago that was a good learning experience...

I have always stored my tools in an unheated barn, and the humidity tends to be fairly high. Went to an event where the tools were brought in from the car the night before, and stored in the demo room. Next day, I had two bad catches with two of my favorite bowl gouges, doing something I do all the time with no problem at home (?)

Turns out, the building had forced hot air heating, and my tools were stored right near the warm air stream. The tool handles had dried out enough that they loosened up, and the gouge was able to rotate in the handle (and into the wood) causing the embarrassing catches.

Note to self: Careful how you store your tools, and carry some thin CA to make sure tool handles stay on tight!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Demo Suprises

#10

Re: Demo Suprises

Mike Gibson

l went to a club to do an all day demo, within a couple of minutes the lathe quit, five guys spent the next half hour trying ti fix it, then gave up. By the end of the day l was horse from describing how to turn.

Michael

Re: Demo Suprises

#11

Don Leydens

Re: Demo Suprises

Don Leydens

The second demo I ever had to do was for my own club. Nice to work with the home town crowd. The demo was on coloring and texturing. I was super prepared and loaded for bear. While some guys were attaching the new mikes to me, they said I'd be on in about 3 or 4 minutes.

That's when I noticed that I had none of my dyes, inks or paints out on the table. Two guys ran out to my truck to look for them, but no dice. Forgot I got a phone call in my shop while loading the truck and sat down my box of coloring stuff on the floor, out of sight. It was still there. Oops!

Turned out that according to feedback, no one noticed and it all went fine, but I was a bit shaken and stirred there for a while!