Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Gun lamp progress

Posts

Gun lamp progress

#1

Gun lamp progress

John Lucas

I had to devise a new clamping method for the 8 segment glue ups. I fell back on an old favorite. String. By balancing the pressure from the top clamp and the string turniquet I was able to close the joint. Had to use my inspection mirror to see it however. Fortunately I had the deep C clamps to help pull it into alignment. I checked the 90 degree angle and it's dead on so hopefully the other 3 will be the same. That's a relief. I really wasn't looking forward to hand planing the angle correct. That usually shortens a ring and throws the whole circle off a little.

While I was gluing up the segments yesterday I cut 200 mitered segments for the two floating rings. I'll start gluing those up this morning. If I'm lucky the walnut segments will glue up as one ring or at least 180 at a time. The maple ring is too thin and I will have to use the rub joint method for those two rings. I put glue on, rub them togther until they start to grab and then hold them for a count of 20. I do this on a waxed surface. Then I just let them sit and go to the next pair. Takes a while to do this but it works really well. One advantage is you can check them at every even angle such as 45, 90, 180 etc and make some minor corrections on the disc sander if needed. Hopefully my segments are dead on and won't need that.

By the way, the blade the came with my Makita miter saw will saw partly through a Destaco clamp and still cut a clean joint. You don't need to ask how I know that.




Re: Gun lamp progress

#2

Looking Good John!


Re: Gun lamp progress

#3

Lyle Jamieson

Re: Gun lamp progress

Lyle Jamieson

John, You are bringing back some old memories. I have done a ton of flat work decades ago before I rediscovered turning. Now I remember why I like turning so much. Im sure. with your retirement, it is a luxury to have the time to tackle such a complex project...but I enjoy turning so much more I would never go back to cutting and gluing and joinery of a flat project. There is a lot of satisfaction from solving all the obstacles you encounter, and getting it done right in your gun case, I just dont want to go there again. It seems OK for me to spend weeks carving on my torso forms, so its not the time involved I guess, it's just the flat work process that I am not drawn to anymore. I try to follow the fun trail. Your cabinet takes tremendous skills and would be challenging and exciting, but not fun for me. Ill get my enjoyment from watching you do it. Thanks for sharing it with us.

Re: Gun lamp progress

#4

Re: Gun lamp progress

Galen Vetterick

As a gun owner myself I have taken an interest in following the construction, but I have already decided it would be a little pricey for me to order one from you next. I'll have to stay with the under the bed or in the closet for now.

I thought about a storage vault using the empty space in the bottom of the sofa though.

I never thought about sawing a relief cut into a clamp as a way of adjusting the clamping pressure, don't imagine you can do that very many times and have it work. :D

Re: Gun lamp progress

#5

I agree

John Lucas

I'm with you on this one. I started all my turning by gluing everything up because I didn't know you could even use thick wood much less green wood. Everything about this is a hassle from the price of the wood to test cutting the miters on scrap and of course I'm real tired of peeling glue of my fingers.

I haven't even gotten around to sanding and finishing which always seemed to take forever when I built furniture. Spray lacquer will probably be my finish but my gun is too cheap and I have a terrible time controlling orange peel on larger pieces and this is certainly larger. That will mean a lot of time rubbing out with steel wool but probably won't take longer than many coats of wipe on poly. I am pretty good at brush on poly but still have to hand rub it out to get the look I like and that will take as long or longer.

The little box I just did was much more fun and in reality more cost effective both time and material wise. You also get a more instant gratification.

Re: Gun lamp progress

#6

Re: Gun lamp progress

John Lucas

Galen My guns have special hiding places not one can find. I won't mention them here but will give you some clues based on previous residences. I have built fake panels in the back of closets held there by magnets or hidden latches. You can put 2 or 3 rifles inbetween 2x4 studs. Just don't use an exterior wall. Too much moisture.

I've build drawers where stair risers go. Great for pistols, knives, jewelry and money. Not that I've ever had any money mind you.

I built a bench for a mud room for a friend. The seat lifted up with a hidden latch and it was long enough and deep enough to store 4 long guns.

I also build a fake back to a china cabinet for a friend to store his guns. The cabinet was on rollers and you rolled it out from the wall and opened the back for access.

Obviously the ideal place is a big gun safe but for some of us it just isn't an option. The inexpensive ones have to be bolted down so they can't just carry it off. The big ones are simply too expensive and I don't even know where I would put one in my house. They are too heavy to put upstairs and there isn't room downstairs.

Re: Gun lamp progress

#7

Re: Gun lamp progress

Philip Morris

John,

I not sure which I am more envious of:

- Your fortitude

- All the time you now have in retirement to do this

It really is shaping up to be a nice piece.

Philip