A few people I know making pens really like the PSI twin jaw chuck. The two tool bars that come with the jaws are small and easy to loose, not that I have done that but I have read around the net a few that have.
I thought I would share my solution, here is how I hold them where I need them, using a ball magnet from Lee Valley.
I had the same question several years ago when I got a "variety pack" of neodymium magnets of various different shapes and sizes. Spherical magnets exhibit the same qualities as "normal" bar magnets with north and south poles aligned on one axis, just like the Earth.
Magnetic field lines are also aligned similar to that of a bar (rectangular) magnet, with possibly some tangential distortion as you move away from the main (longest) axis within the sphere due to the curvature of the sphere, but in general the fields are uniform radially unless there is some other ferro-magnetic material in proximity. See the graphic for lines of force in a spherical magnet at the web site:
"Field of three steel balls and one spherical magnet" at
P.S. "Pacemaker Guys"...... remember that intense magnetic fields induced by permanent magnets can also effect function of sensitive electronic units, just like the fields generated by lathe motors being discussed in the recent past. Popping some high density sources of magnetic flux about chest high on your lathe to hold a couple of tommy bars might be something you need to check out first! Just saying......