Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Jar No. 2

Posts

Jar No. 2

#1

Jar No. 2

Mark Mandell - Gone Round In New Jersey

If you get the chance to turn dogwood, you will relish the experience of wispy streamer shavings floating off your tool like long pasta.

After I blew up a tall vase in Box Elder (punk-rotten core) I grabbed a piece of dogwood I've had drying in the garage for a year or so.

The finish on this piece [9" tall] is a couple of applications of Krylon Matte Finish Fixative after sanding to 220, then rubbed with a bit of 4/0 wool. The cap may still get modified. Comments welcome.

A few bore holes.



Showing some heart and a bit of decay

Re: Jar No. 2

#2

Mike Stafford

Re: Jar No. 2

Mike Stafford

Dogwood is indeed an interesting wood to turn. It is very hard but turns beautifully. It was commonly used for shuttles in the weaving industry and a few years ago I obtained a bunch of shuttle blanks that were very old and very dry and very hard. Still turned well.

Your bottle is a stylized version of a ginger jar I would say. Must have been fun hollowing. Nice work.

Re: Jar No. 2

#3

Hollowing

Mark Mandell - Gone Round In New Jersey

Keep the cutter very sharp (diamond hone) and it cuts like old cheese; very smooth with a lovely "hissssss".

I think the cap's a bit too large, but I'll let it sit a while and ponder it.

Re: Jar No. 2

#5

Re: Jar No. 2

john Veerkamp

Agree, shorten the cap by half.

Re: Jar No. 2

#6

Mike Stafford

Re: Hollowing

Mike Stafford

I have never hollowed using a hollowing system except a couple of times trying one out. I generally do most of my hollowing with a gouge followed by a Hunter tool. Hunter tools love old dry hard wood.....

I suppose the lid could be shorter but as it is I don't mind.

Re: Jar No. 2

#7

Re: Jar No. 2

Jim Breeden

Dogwood - very appropriate with the outline of a hound in the first photo. :)

Re: Jar No. 2

#8

Re: Hollowing Systems

Mark Mandell - Gone Round In New Jersey

Since I developed an "issue" with my left arm (goes numb and weak without warning during use), I've had to adopt captured/controlled hollowing for safety. I built my own Sudol-Jamieson clone, but having learned to hollow the Ellsworth Way, didn't like all the finger work. The KOBRA is the only one that allows me to use full-body movement for hollowing. I also made some carriers to use Hunter #4's on my boring bars and have turned larger bowls that way


Yes, the bar is too high in the photo. When the Hunter's mounted it cuts at dead center. Pull stokes give a very nice surface.

Re: Jar No. 2

#9

Mike Stafford

Excellent!

Mike Stafford

I am sorry that you are having arm problems. Getting old is just like Granny said it would be......and that ain't good.

Take care.

Re: Jar No. 2

#11

Re: Jar No. 2

Barry Irby

Very nice.

I think the top is too spherical. Try turning one that mimics the shape of the jar more.

Re: Jar No. 2

#12

Hunter Tool

Mark Mandell - Gone Round In New Jersey

Got an email about using Hunter cutters on a boring bar so thought I'd post them here.

First is the straight holder


With the straight shaft you can vary the attack angle of the cutter by rotating it in the bar to go from a hogging to a shearing cut.

Second is the bent holder



This cuts beautifully through the transition of a deep bowl and is very controlled for end-grain hollowing using a pull stroke up the sidewalls.

The holders are milled from 1/2" O-1 rod . Since I didn't have a chamfered end mill, each piece took two cuts with a 1/2" mill; one for the step and one with the stock canted 10° to approximate the bevel on the cutter. This left a slight gully in the seat step which I filled with some lead foil. The lead took all the vibration out of the cutter.

Re: Jar No. 2

#13

Mike Stafford

Re: Hunter Tool

Mike Stafford

Mike Hunter makes a wide variety of aftermarket cutter assemblies that fit almost all boring bar/hollowing systems.

The way he seats the cutter eliminates the chatter and supports it very well. I have one for my Sorby multi-tool that I use when circumstances demand.

Re: Jar No. 2

#14

New?

Mark Mandell - Gone Round In New Jersey

I know Mike makes a couple of short carriers, 3/16" and 3/8" straights, but I haven't seen a bent holder except in his swan-neck full shaft tools. He making something new in this department?

Re: Jar No. 2

#15

Mike Stafford

Not sure about bent?

Mike Stafford

If Mike sees this I will let him address that question. I don't use a hollowing bar so I don't know as much about all of his offerings for that kind of equipment.

Mr. Hunter?

Re: Jar No. 2

#16

He Knows

Mark Mandell - Gone Round In New Jersey

about my holders. Sent him pix long time ago. Since my application is for captured/controlled boring, I'll bet the demand is less. He's been busy developing his hand-held tools.

:)

m