Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Anyone turn pens on a shopsmith

Posts

Anyone turn pens on a shopsmith

#1

Anyone turn pens on a shopsmith

John Lucas

If you do what are the downsides. I've tried to turn other things on my Dad's machine and basically it's just a crappy lathe. However pens are small enough it might handle those. My Dad needs another hobby. After his stroke he's not ever going to be 100% and I think woodworking as he used to do it is not going to work.

He loves to build thing and give them to people and I think pens might be easy and safe enough for him to do that. If he can't use the shopsmith I can get him a mini lathe and using some of the new carbide tools he won't need to have a special sharpening set up. He never liked sharpening lathe tools anyway.

Re: Anyone turn pens on a shopsmith

#2

Mike Stafford

Re: Anyone turn pens on a shopsmith

Mike Stafford

I don't know how tall your dad is but for most people the Shopsmith is just way too low to work at comfortably when turning. I started turning on a Shopsmith but never turned pens with mine.

I think you could turn pens with a Shopsmith if you piled sand bags on it to deaden any vibration.

I believe the better choice would be to buy a mini lathe and make sure it was at the right height for his comfort. Even better might be an arrangement where he could sit.

Doing things like this are definitely good for keeping the mind active. I think it is a great idea. I hope I am still turning a few years from now.

Re: Anyone turn pens on a shopsmith

#3

Ken Vaughan

Re: Anyone turn pens on a shopsmith

Ken Vaughan

Been there and did that for a little while --

Three issues with ShopSmith for turning

Height

Vibration

Crappy tailstock arrangement.

The ShopSmith makes a good disk sander and horizontal boring device for drilling pen blanks and squaring the ends. A VS midi lathe would be a kindness.

Get it set to the right height for the turner. You can turn off a stool quite nicely and carbide is good pens -- though a skew is often in my hands when doing little stuff.

Re: Anyone turn pens on a shopsmith

#4

Re: Anyone turn pens on a shopsmith

Dick Coers

Penn State has slip on mandrels for Shopsmiths for $17.95. You'll also need a 60 degree live center to work with that mandrel. I guess that they have a 1 MT, Penn State has those too. Never owned a Shopsmith, never turned on one.

Re: Anyone turn pens on a shopsmith

#5

Harry Robinette

Re: Anyone turn pens on a shopsmith

Harry Robinette

John

Do yourself and your dad a favor and get him a mini lathe. Shopsmith for pens is very cumbersome,been there tried that.To me it's NOT a good idea.

Re: Anyone turn pens on a shopsmith

#6

Re: Anyone turn pens on a shopsmith

John Lucas

Harry That's what I thought as well. I owned a shopsmith and did start my turning career on one. The lathe feature is probably it's weakest link in my opinion. If he's really interested I'll set him up with a mini. He can use the shopsmith as a drill press and use the disc sander to square up the ends.