Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

electronic calipers

Posts

electronic calipers

#1

electronic calipers

John Lucas

Charlie reminded me below about batteries. I have a Grizzly electronic caliper. Every %$#@ time I use it I have to replace the batteries. Anyone know if the more expensive units from the good companies will do better. I am religous about turning that thing off every time I put it up.

It could partly be the batteries. Since it uses them so fast I purchased them in bulk online. I can't really tell that these are any worse than the more expensive brand name ones however.

Re: electronic calipers

#2

Re: electronic calipers

Grant Wilkinson

I have one from Lee Valley, John. It wasn't inexpensive, but the battery routinely lasts well over a year. Mine may not be off and on as often as yours, but it gets plenty of use. I frequently forget to turn it off, but it turns itself off after a preset number of minutes. Now, don't get me talking about the Wixey gauge on my planer. :-)

Re: electronic calipers

#3

Re: electronic calipers

John Lucas

Thanks Grant. I have a Wixey angle gauge and I don't use it very often so I remove the battery every time. Of course I just said that and for the last 2 weeks I've used it almost every day. That's rare though.

Re: electronic calipers

#4

Re: electronic calipers

Grant Wilkinson

I don't want to pull this off your original question, John. I have the Wixey digital gauge on my DW735 planer, and it sucks batteries like lollipops. If I take the battery out to save its life, I need to re-calibrate the gauge each time. Not a big deal, but a pain, nonetheless. In their defence, Wixey did offer to look at it, but shipping, customs and general BS to move it back and forth from Canada to the US and back is not worth it to me.

Good luck with finding a good caliper. I"m sure others here will chime in soon.

Re: electronic calipers

#5

Re: electronic calipers

Carol

I find that heat in the shop kills mine. I have seen it @ 130º in there. Can't leave flash lights in there either.

Re: electronic calipers

#6

Re: electronic calipers

Dale warder

I can relate to this problem. I have three electronic calipers, and all eat batteries. Brand or price does not seem to influence this. Finally solved the problem. I switched to dial calipers. I find these both easier to use and never require batteries.

Dale

Re: electronic calipers

#7

Re: electronic calipers

John Lucas

Dale I used dial calipers for years until I broke the last one. Now it's a "size" caliper that use for spindles where I don't need a measurement. I may just go back to those. I thought the digital ones would be faster and easier for my old eyes to read.

Re: electronic calipers

#8

Nyuk Nyuk Nyuk


Re: electronic calipers

#9

Re: electronic calipers

Tony - Memphis

I had the same issue with the Wixey on my 735. I talked to them about it and they are very nice, but it is what it is. So, when they offered an upgrade option, I inquired and was told it was better. I ordered one ($20 I think?). And installed it. It does seem to last longer. I like the concept, but I'm not sure it was worth the money. I end up trusting my dial calipers more the the gauge anyway. My slide mechanism sticks a little sometimes too. I also got the tilt cube from Beall. It works pretty good, but I noticed that my cuts were off just a hair recently and checked the blade angle with the gauge. The gauge tod me it was 90° to the table, but my cuts were off just a hair.

Tony

Re: electronic calipers

#10

Dick Hines

Re: electronic calipers

Dick Hines

I have a set, can't remember the maker. They ate batteries until I started taking the battery out when not in use. What little time it takes to install the battery is worth not haveing a dead battery just when I need them.

Re: electronic calipers

#11

Re: electronic calipers

Dave Paine

I am with Dale. I purchased an electronic caliper and found it was not as accurate as a normal dial caliper.

Something about the method of reading the movement. The 3 digit readout of mine was not an indication of being accurate to 1/1000in. There was a jump to the next electronic notch.

I have not tried the electronic one recently, but I would expect the battery to be dead.

I will avoid mentioning the battery life of my Wixey digital angle gauge, or my Wixey digital table saw fence gauge. The table saw fence gauge has the same lack of accuracy as the electronic caliper. Sad that I now feel it was a waste of money. Seemed like a good idea at the time. :\

Re: electronic calipers

#12

Phil Stivers

Ah, but it a dry heat :-)


Re: electronic calipers

#13

Re: electronic calipers *LINK*

Galen Vetterick

I have a Lyman digital caliper I purchased for my reloading hobby. I paid $39, but they are $54 by todays price. I don't use it for wood measurement but do for tools setups. The battery last forever if you remember to shut it off! Uses one Energizer357/303 battery and I still have a replacement in the case.

I use a cheap Companion manual for most wood spindle measurements.


http://www.lymanproducts.com/lyman/case-prep/electronic-digital-caliper.php

Re: electronic calipers

#14

Re: Ah, but it a dry heat :-)

Carol

Dang dry heat! Even sucks batteries dry!

Re: electronic calipers

#15

Mitutoyo batteries last for years.. *LINK*

Dick Coers

I have a Mitutoyo Absolute Digimatic at work. It lasts for years on a single battery. It was purchased by the last model maker before he retired, so no ideal how old it is. They advertise 20,000 hour battery life. Costs around $110.


Mitutoyo 500-196

Re: electronic calipers

#16

Re: Mitutoyo batteries last for years..

Bayward

I have a Tesa brand one that I have had for four or so years and it is still using the battery it came with. Somewhere around the same price as yours. $100 ~ $120.

Bob

Re: electronic calipers

#17

Re: electronic calipers

Charlie Drake

Don't laugh (yeah, right), but I bought a couple of digital calipers from Harbor Freight with auto shutoff for about $10 on sale and they work every bit as well as my Mitutoyo and the batteries have lasted a long time (you could always put masking tape over the name).

Re: electronic calipers

#18

Re: electronic calipers

Bill, Jacksonville NC

Nice article ‘Digital Caliper Battery Hack” at sparkfun.com/tutorials/362

Modifying caliper to use one AAA battery.

Comments and link below nice read too!

Article is what it is comments and link below make more sense. Anybody know something about shims?

Re: electronic calipers

#19

Ric Taylor

Re: electronic calipers

Ric Taylor

Batteries are one of those items that you truly get what you pay for. I never buy cheap batteries, always go for the major brands.

Ric

Re: electronic calipers

#20

Re: electronic calipers

Bill, Jacksonville, NC

Found this article below and set out to find a Mitutoyo part # 541980, battery to fit my no name calipers. Not easy to do, so guess any brand SR 44 battery better than LR44 supplied with your caliper or A76 Alkaline batteries sold at Wally-World and Batteries Plus. Everyone knows when push the off button on your digital calipers only shutting of display mode so still using battery power.

Longevity, got lost at micro amps on-off and different chemical composition from battery manufacturers. So will buy SR-44 Batteries if available locally.

Mitutoyo caliper design feature saves power when you push the off button, still using micro amps but not as much as other Chinese calipers. Will battery longevity be as good with other brand name SR-44 batteries?

fliptronics.com/tip0006.html