Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Learning the Skew

Posts

Learning the Skew

#1

Learning the Skew

Jeff Rich

After many failed attempts over the years, something has finally clicked about using the skew. I am not sure if it was a speed or sharpness or technique.....

but I finally managed not the spiral or vibrate the piece to death.

Here are 2 bottle opener handles I turned mostly with the skew.

Re: Learning the Skew

#2

Re: Learning the Skew

Jim Breeden

Good job ! 8) I'm still learning which way is up. :b

Re: Learning the Skew

#3

Leo Cuellar

Re: Learning the Skew

Leo Cuellar

Looking good. I've found that the most important thing with the skew, is to just keep practicing.

Re: Learning the Skew

#4

Re: Learning the Skew

John Lucas

Ditto What Leo said. I've played with 17 different skews in the last 2 months all with different grinds from convex to hollow ground, round skews straight skews and different angle both the cutting angle and the sharpening angle. I can't tell that any one has an advantage over the others except that sharper skews cut easier and are slightly more grabby. By sharp I mean the sharpness angle, not whether it's razor sharp or not. That's assumed.