Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Mor(e) on scraping!:D

Posts

Mor(e) on scraping!:D

#1

Leo Cuellar

Mor(e) on scraping!:D 

Leo Cuellar

First, a really big thank you to everyone who responded to my request for info on negative rake scrapers. This took me someplace I didn't expect. It taught me a lot more about scrapers and how to use them than I knew before.

1. A small burr is better than a big burr for refining a surface.

2. The quality of cut is directly proportional to the quality of your cutting edge.

3. Shear scraping is superior to regular scraping.

In this photo, the features were turned with conventional tools and riding the bevel. The beads with a Grizzly 1" skew. The half coves with a very old Buck Bros. 3/8" cast steel spindle gouge. One set was then completely resurfaced by shear scraping with an HSS bullnose scraper, being prepped on the buffer.


If you would please, tell me which one(left or right) you think is which.

Re: Mor(e) on scraping!:D

#2

Re: Mor(e) on scraping!:D

Philip Duffy

Scraper; on the right! Phil

Re: Mor(e) on scraping!:D

#3

Leo Cuellar

Got it in one!

Leo Cuellar

You are correct, Sir! :D Surprisingly, practicing those dainty shear cuts with the scraper is giving me a gentler touch with everything else. Spent several good hours spinning wood this morning.