Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

delta lathe

Posts

delta lathe

#1

delta lathe

reed jacobs

Trying to help a friend sell her late husbands Delta 1440 iron bed lathe. Bought new in 2007.

Is Delta still making this lathe? If so, then what is the cost for a new one? I'm having a hard time finding this info on line so I can determine the cost for her used one. Please help. Thanks.

Re: delta lathe

#2

Re: delta lathe

Greg Haugen

Delta is currently only making one lathe, with variable speed and belt-changer options, the 12 1/2" swing midi lathes 46-460 and 46-455. That model lathe was my first in '05. At that time I paid $600 for it. Depending on condition and included accessories the price ranges would be from the stock "only driven on sundays" in the $500 range (accessories would raise the price, with heavy use I'd say $350 to $400 would be an absolute bottom price). The Reeves drive is the one strike against the lathe and it's not-so-slow slowest speed. But for starting out, it's an adequate lathe.

Greg

Re: delta lathe

#3

Re: delta lathe

waltben

I started with one years back and it also cost about $600. (Got it from Amazon with free shipping.) Never had any problems with it and used it a lot for about four years. It's slowest speed is not really slow enough for large pieces though, and it needs some extra weight for out of balance things. Otherwise, it's a good starter lathe.