Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Pricing of "used" machines vs lathes

Posts

Pricing of "used" machines vs lathes

#1

Pricing of "used" machines vs lathes

Dave Paine

I do not want to hijack another thread about the pricing of used lathe's, but having read the thread I am not understanding why a used lathe is considered by the group to be so valuable.

One response stated :

"Me thinks that a good used lathe is the same thing as a new lathe, minus the cost of shipping".

If I posted a used table saw for sale and was asking close to the price of the new table saw, I would expect people to tell me my price was too high and I would never sell it.

So this begs a question for me, what makes a lathe so special to justify such a high resale value compared to what I would consider comparable tools?

My present table saw cost a lot more than my present lathe.

Is it the brand/model which dictates the value? I appreciate the brand makes a lot of difference for making items.

I am not trying to start a war, just trying to understand.

Re: Pricing of "used" machines vs lathes

#2

Re: Pricing of "used" machines vs lathes

John Veerkamp

I can't answer your question directly, but maybe that's why my Delta VS lathe in the classifieds has no response, priced too low. I priced it like I would any other good power tool of it's age and condition. I'll be interested in the responses.

Re: Pricing of "used" machines vs lathes

#3

Re: Pricing of "used" machines vs lathes

Dave Paine

John, your posting is an excellent price for the lathe. I did not look at this since I presently have a lathe. I hope others who are closer to you take a look at your Classified posting.

Re: Pricing of "used" machines vs lathes

#4

Patience and Knowing what you want...

jake Niedling

I certainly consider a used lathe just that and it has some wear and tear. It would be a rare situation where I would pay new price minus shipping for a used lathe. Like never been used would be that rare condition. It really comes down to what you want and what you are willing to pay. For the seller, it is a matter of how quickly do you need to get rid of it. There is always a fair price based upon the condition of the lathe. I have seen some 3 year old lathes that looked like they had been trough a war, while an 8 yr old lathe looked like new. I waited about 5 years looking for a Powermatic 3520 at what I was willing to pay and one in excellent condition. I finally found one last month and both the seller and I was happy with the deal.

Re: Pricing of "used" machines vs lathes

#5

It must be availability

Dick Coers

I think it's a market based on machine quality, and availability of those lathes. You can rip a piece of wood with a good blade on a Rigid table saw and get a pretty good cut. Use a good chisel on a Rigid lathe, not the same result. How many high end lathes are sold each year, and for how many years? I have no idea, but it can't be the same as all the table saws sold each year. Same goes for age of the machine. Throw a good blade on a 50 year old unisaw, great result. 50 year old Delta lathe with a 150 lb. block of wood, impossible. There just aren't the number of high quality lathes out there for the price to drop. Wait about 30 years and they might be a dime a dozen as all us old timers go 6' under, or hit the nursing home.

Re: Pricing of "used" machines vs lathes

#6

Steven Antonucci

Price of quality

Steven Antonucci

I think you need to look at the price of the higher end. A Craftsman lathe sells for nothing on the resale market. A Nova sells for 80% of list. The Oneways, Robusts, and Stubbys resell at near full value of whatever current list is because you don't have to ship them (which is expensive).

Try pricing a Unisaw on the secondary market. Or a Robland. Same results.

I suspect that supply and demand is part of it, but also, quality does not depreciate. Neither in price nor capability. If you want a bargin, you have to go back to the antique market and retrofit of build your own.

Steve

Re: Pricing of "used" machines vs lathes

#7

Re: Pricing of "used" machines vs lathes

John Lucas

It's purely availability. I can buy a table saw or bandsaw most any day of the week by watching the local sales network and doing a little search on other sales in my area. It's very hard to find lathes. Well OK, good lathes. You can buy Craftsman and Harbour freight low dollar lathes all the time. It's extremely rare to find something like a Jet 1642 and even more rare to find the top of line lathes.

Re: Pricing of "used" machines vs lathes

#8

Re: Pricing of "used" machines vs lathes

Barry L Elder

In my experience, there are 10 zillion tablesaws out there and maybe a million lathes. As Dick said, availability.

Re: Pricing of "used" machines vs lathes

#9

Re: Pricing of "used" machines vs lathes

Jim H

If you were in central Texas we would be talking.

Re: Pricing of "used" machines vs lathes

#10

Tony Reynolds

Re: Patience and Knowing what you want...

Tony Reynolds

Obviously only you can make that decision, but one has to also decided what price to but on the 5 year wait to enjoyment a piece of equipment you wish to purchase. To me, 5 years to save a few hundred dollars seems expensive.