Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

They dropped My PM 3520 on the motor

Posts

They dropped My PM 3520 on the motor

#1

They dropped My PM 3520 on the motor

George Guadiane

The movers dropped my lathe on the motor. The casing is bent with the screw mounts torn. I'm afraid the motor is terminal, AND the drive pulleys no longer lines up with the center pulleys. I don't know if it is just the motor that is killed or if the whole headstock is blown and I don't know anyone yet in the Daytona Beach Florida area who can tell me...

HELP! (please)

Re: They dropped My PM 3520 on the motor

#2

Re: They dropped My PM 3520 on the motor

Chuck Engstrom

Sad news, George. It does sound like the whole headstock may need replacement, but you might ask the insurance co. if you can buy the dead one for a nominal amount so you'd have a spare electronic controller etc. Be sure to report it fully and immediately to the moving company, and you might as well tell your homeowner's agent as well and see what they say.

Daytona is fairly close to Orlando, as I recall, so you have a big city nearby where there may be more than one Powermatic dealer. There is a Woodcraft over there on sort of the northeast side of Orlando, Casselberry I think, and they may be able to offer some advice. For that matter, call Powermatic HQ and ask them who should judge the damage for you.

Best of luck with it.

--Chuck

Re: They dropped My PM 3520 on the motor

#3

Re: They dropped My PM 3520 on the motor

Nick Todd

About a year after I purchased my 3420a, the bearing on the work side of the head stock started to spin. After having the tech confirm the problem, powermatic decided to replace the lathe. Because the ways & the headstock are mill to match, you should not replace the headstock on the lathe with a headstock from another lathe.

I would discuss your issues with powermatic support. They should be able to tell what issues are fixable & which ones should not.

Good Luck.

Nick

Re: They dropped My PM 3520 on the motor

#4

Re: They dropped My PM 3520 on the motor

darrin hill

just curious..

shouldn't the movers pay for the fix?

Re: They dropped My PM 3520 on the motor

#5

Re: They dropped My PM 3520 on the motor

joel nucifore

OUCH>>>>>>>>>>>>>>> I am so sorry that has to hurt

Re: They dropped My PM 3520 on the motor

#6

Re: They dropped My PM 3520 on the motor

johh lucas

George sorry about your miss hap and thanks for the heads up. I'm thinking about moving in a year or so and had not considered checking on insurance covering loss during the move. I have always moved myself but I'll probably have to hire someone for the next move and need to make sure either they or I have enough insurance to cover something like that.

Re: They dropped My PM 3520 on the motor

#7

Change your name when you retired?

Dick Coers

It nows shows up as Johh in the your name line of the post. Not too imaginative if you ask me!

Re: They dropped My PM 3520 on the motor

#8

Re: They dropped My PM 3520 on the motor

Don Orr

Ouch! That had to hurt. Sorry to hear of the damage. I hope you documented everything and filed the appropriate claim. From the above posts it sounds like it may be terminal. Hope you get back up and running soon. Maybe you'll end up with a new lathe. :D

Were they trying to move it in 1 piece or did they take it apart? Hopefully they didn't wreck anything else.

Keep us posted.

Re: They dropped My PM 3520 on the motor

#9

Re: They dropped My PM 3520 on the motor

Vincent Welch

George,

Nick Cook is in Marietta, GA and while he is not in Florida he is close by. More importantly, Nick works very closely with Powermatic and I beleive he will know who you would reach out to for support. You can check his website to get his number. Google "Nick Cook Woodturner" if you need too.

Vince