Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Weird Friday question

Posts

Weird Friday question

#1

Steven Antonucci

Weird Friday question

Steven Antonucci

With the 4th falling in the middle of the week, this has been a weird week. It's been very disjointed, hot and I've not really had a sense of what day it was all week.

So, in the spirit of a completely weird week, a weird question:

Aside from your shop. how many of you have dedicated craft spaces inside your home? I mean a part of your house solely dedicated to "making things"? My wife has a scrapbooking room, but she will invite her friends over and that takes over the dining room. When it is just her alone, she's got her space.

I have a sunroom that is in a state of disrepair, but when I finish it, it will be a craft space. I am planning to make a central bench with a maple top that the kids can color on, but it will also have a vise on it for light duty clamping and plenty of storage for everyone to store whatever it is that they store.

Do you have a craft space in your living area?

Steve

Re: Weird Friday question

#2

Rob Wallace

Does a brewery count as a 'craft area'?

Rob Wallace

I have a dedicated space (shared with furnace & hot water heater) that is a built-in home brewery with commercial stainless steel sink, 45,000 BTU natural gas stockpot stove, two tier brewing vessels and stand made for stainless steel sparge water (electric heated) and mashing vessels, ventilation hood, fermentation racks for large glass vessels, and custom plumbing fixtures to simplify the brewing process. Not sure if I'd call it my "living space", but it certainly is dedicated to a form of 'craft'.

I also have a dedicated space for an amateur ("ham") radio station that I share with my at-home office.

Just specialized 'man cave' areas, I suppose...

Rob

Re: Weird Friday question

#3

Re: Weird Friday question

Dick Coers

I have a table set up in the 3rd bedroom/den/computer room, for assembling jewelry. It's a simple rig with a cheap IKEA desk light. Plenty of room for my organizing drawer units too. I just lost too many of the findings in the shop. Small jump rings would just launch towards any sawdust on the floor, and would be lost to my aging eyesight. Of course the law of horizontal surfaces always applies, and that table quickly gets covered over with magazines and other misc.

Re: Weird Friday question

#4

Re: Weird Friday question

Dave Paine

My wife has sublimation printer and two presses. These take up some space, but not an entire room dedicated.

One press is for T shirts for which I made a dedicated bench.

One press for mugs which went on an existing counter.

My wife has lot's of sublimation "stuff" laying around - T shirts, mugs, tiles, which takes up a lot of room, but no single room has been dedicated. Perhaps if I force my wife to use "only" 1 room, then I can reduce the "stuff" to fit.

Food for thought. :D

Decades ago I did calligraphy and had a drawing board dedicated for this activity. I still have the drawing board, but these day it stands unused in a corner.

I cannot even say my shop is dedicated for wood working, since I have to share this with various machines to maintain the property, e.g., tractor, snow blower, portable generator etc.

Re: Weird Friday question

#5

Re: Weird Friday question

Don Orr

Not exactly in our living area but my wife put on an addition a few years ago for her sewing stuff. Several machines on tables with supplies and accessories neatly organized around the room. There is a small sitting area with a gas fireplace in 1 corner and her exercise stuff in the opposite corner. This is above and beyond her pottery studio which encompasses the entire basement (excluding the furnace room) including the full basement under the addition mentioned. I have my shop and a corner of the garage and I'm thankful for as much as I have which is more than many.

Re: Weird Friday question

#6

Re: Weird Friday question

Dan Jechura Temperance Mich.

When the kids moved out 6 years, I gained a den/boy scouting/computer room for a couple years. Now a couple years ago I redid the room as a craft room/paintig room for my wife. Something she has not done yet, but I keep hoping. She was a good painter.

The basement used to be a shop untill I built the garage 20 years ago.

The 2nd kid bedroom is turning into a murphy bed room / bowl display area/ tv room/what ever I want to do room.

My garage/shop is wood working and automotive wook area, 28 ft by 44 ft. An it is 90 % mine, 10 % her flower stuff.

Dan J.

Re: Weird Friday question

#7

Re: Weird Friday question

Stuart Johnson

When I got my shop and moved out of he two car garage we enclosed it and turned it into my wife's sewing studio. This works well because with five sewing machines, enough material and thread to clothe a small nation she doesn't say much about my tool and wood needs.

Re: Weird Friday question

#8

Re: Weird Friday question

mjonesrdg

I rent a space, one bay of a metal building, for my "guy" stuff, and it's about 10 blocks from my home. She gets the "spare" bedroom, walk-in closet and all!

Re: Weird Friday question

#9

Re: Weird Friday question

john Veerkamp

My wife has a dedicated sewing/quilting room. However she also weaves and her big loom is a feature in our living room. The basement is my turning "studio". The ww shop is in a separate building .

Re: Weird Friday question

#10

karl jr

Darkroom

karl jr

Although it isn't used on a regular basis. Only when I have an urge for the smell of fixer. ;)

Re: Weird Friday question

#11

Steven Antonucci

Is now my wife's scrapbooking room...


Re: Weird Friday question

#12

Harry Robinette

Re: Is now my wife's scrapbooking room...

Harry Robinette

My shop is 2/3s of the basement I'm just at 24 x 29 thats wood and medal .The wifes stain and kiln glass

is in the other 1/3 of the basement 24 x 20. We're happy but could both use more room like everyone else.

Re: Weird Friday question

#13

Bill Blasic

Re: Is now my wife's scrapbooking room...

Bill Blasic

I have a room that on one side is my mat cutter, mat and glass storage and on the other side is where I built golf clubs for many years.

Re: Weird Friday question

#14

Tony Reynolds

Re: Does a brewery count as a 'craft area'?

Tony Reynolds

Sounds like it would count to me!

Tony

K8FAR

Re: Weird Friday question

#15

Rob Wallace

K8FAR DE WA0RW - TNX ES 73, ROB


Re: Weird Friday question

#16

Re: Is now my wife's scrapbooking room...

Grant Wilkinson

My basement shop is 26 x 13. My wife is a painter and she has a studio in another part of the basement We have an outside porch off the second floor master bedroom that, in the good weather months, is 'stone dust studio". It's where my wife works on soapstone sculptures. She has a great breeze, good natural lighting and the dust is outside.

Re: Weird Friday question

#17

Dang, I'm sure you have no shortage of friends,

Keith Newton

wanting to sample the end product of this craft. I was just thinking that if I ever get up your way, I want to stop by.

My "Man Cave" is mostly shop, with a little living space. I have an old grocery store, Safeway # 10, built in 1926, which is 50' x 100', with a small live-in studio. The office / dust room, is in between.

All of the shop is one big open space, with a large pair of doors in front, to bring boats in, and lumber storage. Most of the work space is equipped with old industrial equipment.

Most metal working is done out back, and the sawmill is out there too. A 10' high privacy fence shields that 10,000' parking lot from the rest of the world.