They Went Thattaway - OOOPS!
charlie belden
Thought it was time to do a miniature pedestal piece - a ball with finial top and bottom - sitting on a tall pedestal. Aim the top finial in any direction you want - and point in any direction you want and say
"They went thattaway!"

The ball and two finials were turned without any problems. Then I started on the pedestal - and was minutes away from parting it off when I decided to do a little touch up sanding. BIG MISTAKE! Got careless getting the hand doing the sanding out of the way - and contacted the part hanging out in the air and spinning at around 2,200 rpms.
Here's what I ALMOST had - and what I DO have.
But the hour I had in the pedestal isn't wasted. The next one will be a bit less buys - taller and more delicate. And I think I'll find a better shape for the top - that doesn't look like a toilet plunger ; )



