Well I FINALLY got the videos for turning miniature plates, bowls, hollow forms and finials shot, edited and uploaded to YouTube, along with illustrated Step By Step images you can download, print and take out to the lathe to try what you see - and watched.
Comments and suggestions for improving this stuff is definitely welcomed.
Its good to have the diagrams and the videos all linked at one site.
Have you tried a small detail gouge with a long bevel fingernail grind? I wonder if it might be easier to undercut the foot of the tiny bowl than a 1/4" bench chisel? My smallest detail gouge is 3/8", but I have a 1/8" spindle gouge I could re-grind -- problem would be vibration, as there is not much meat there. The bench chisel is plenty beefy, so it won't give you vibration troubles. Might be nice to use a small dedicated tool from 1/4" round HSS stock.... Maybe Doug Thompson or Keith Tompkins can send a free sample of their next entry into the tool marketplace...
Seems like a tiny, thin-profile tool rest to allow closer work would be a great addition to anyone's tool shelf if they wanted to work in miniature. I would have a tough time getting close enough to avoid vibration from extending over the larger rests.
Hope you continue to have fun, and inspire great thinkers around the globe with your outside-the-box ideas...
Doug Thompson besides making a 1/4" detail and spindle gouge also has a 1/4" blank for sale. I visited Doug at his shop yesterday and bought 2 of the 1/4" blanks.
> Have you tried a small detail gouge with a long bevel fingernail grind? I wonder if it might be easier to undercut the foot of the tiny bowl than a 1/4" bench chisel? <
One of the things I'm trying to get acrossed is how simple turning miniatures CAN be - no special tools needed - and if you decide you NEED a tool to do something you can't do with the simple tools - making one isn't that difficult - as you saw with my "hook tool". Don't need special steel, no heat treating, no dollars spent buying a tool or a special blank to make a tool.
Dentist (or Dontists) have all kinds of dental picks and tools stached in a drawer somewhere in the office that can be used as great little hollowing tools. And they're usually there for the asking - IF you ask.
Here's one I found is great for hollowing squat hollow forms - shown about actual size. The blue tape covers up the end I'm not using. In the event of a little catch, the tape protects my fingers from that end of the tool.
>My smallest detail gouge is 3/8", but I have a 1/8" spindle gouge I could re-grind -- problem would be vibration, as there is not much meat there. The bench chisel is plenty beefy, so it won't give you vibration troubles.<
Tool vibration isn't much of an issue. You've got a relatively small diameter blank held in a chuck, extending out only a few inches. If you true up the blank and then start going fine - assuming you're not a LEAN INTO IT AND MAKE IT CUT turner, - the forces involved are very small.
When doing miniatures, you pretty much have to stopl worrying about all those things that you have to worry about with "regular sized pieces". With miniatures, it's more technique than tools
> Might be nice to use a small dedicated tool from 1/4" round HSS stock.... Maybe Doug Thompson or Keith Tompkins can send a free sample of
Seems like a tiny, thin-profile tool rest to allow closer work would be a great addition to anyone's tool shelf if they wanted to work in miniature. I would have a tough time getting close enough to avoid vibration from extending over the larger rests.<
I think you're still coming at this as if you're turning a regular sized piece. The blank is less than an inch in diameter and held in a chuck so one end's open. I can get the regular sized tool rest that came with my JET Mini in close enough - as you saw in the videos. You really don't NEED special tools to do miniatures - honest, But if you're a Tool Phreak, by all means buy, make or adapt to your hearts content.
>Hope you continue to have fun, and inspire great thinkers around the globe with your outside-the-box ideas...<
Nothing I've turned so far is beyond an advanced beginner, or a beginning intermediate. And Wild Hare Ideas are in everyone's head - waiting to get out. I just happen to let some of them out more often than some other people.
And that's the point I keep trying to make - and why I keep throwing out ideas, sometimes even providing details on HOW. My objective is, by setting an example, to get others to step Out Of The Box and try something that interests them but haven't gotten around to trying - for whatever reason. If I can get someone to think or say "That might be fun to do. And if this bozo can do it - I sure as hell can."