Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Tool Holder

Posts

Tool Holder

#1

Tool Holder

Ray - Middletown, in

This is the third tool caddy, and probably not the last. but so far it seems to work well. I found an old computer chair at a yard sale for a couple of bucks and only saved the lower section. Went to the borg and found a coupling about the right size and a length of 1 1/4 PVC.



Then went to the lathe and turned a hub to support a small lazy susan.



Made a 14" dia plate with 24 1 1/16 holes with a 1 1/4 c'bore on a 10 degree angle toward the center.



And here is the semi-finished product. Having the handles on an angle reduces the chance of grabbing a sharp edge getting a tool from the lower carousel.



I will probably put two more turntables on, one for chucks and such and another for sanding disks. Pics taken on my cell phone, maybe I will remember the camera when/if I get it finished. Wife calls it my iv tool carrier.

Ray

Re: Tool Holder

#2

Re: Tool Holder

Don Orr

Very nice design. Looks like it hold a lot of tools and has them easily and safely accessible. Ans it does look a bit like an IV pole. ;-)

Re: Tool Holder

#3

Re: Tool Holder

Jennifer Indy.USA

Nice one Ray. That might even get the Clay Foster organization/tidy thumbs up :)

Re: Tool Holder

#4

Re: Tool Holder

Ray - Middletown, in

Don't let him see the rest of the shop...oh, wait, he has. Probably still laughing.

Ray

Re: Tool Holder

#5

Re: Tool Holder

Nick Tuzzolino

Nice job, Ray. Way slicker than what I am using now.

How is the top tier supported on the pvc? Can you please elaborate on your tier stacking/support?

Thanks.

Nick

Re: Tool Holder

#6

Forgot a picture

Ray - Middletown, in

Here is the hub at assembly. I cut slits around the hub making it a collet that slides up and down the PVC center pole. I made it this way so I could adjust it up and down until I found a comfortable height. Just put on a couple of hose clamps to secure it.



Turn the hub upside down, mount the lazy susan, then the tool tray and slide the assembly down the center shaft.

Ray

Re: Tool Holder

#7

Ellis Walentine

Re: Tool Holder

Ellis Walentine

Nice, Ray. I wouldn't have thought that angling those holes would angle the tools. Great insight.

Ellis

Re: Tool Holder

#8

Re: Forgot a picture

Nick Tuzzolino

Perfect. Thanks, Ray. I love the angled hole idea. This alone will pay for itself in the cost of Band-aids. I once made rocket launcher type setup, cut myself twice before I had all the tools set up.. Went straight to the trash, tubes and all.

Re: Tool Holder

#9

They don't

Ray - Middletown, in

unless you put the c'bore first. Since the ferrules are 1" I thought a 1 1/6 hole would divert the tool but I had to go back and add the c'bore. That seems to direct the angle of the tool better than the hole although having them both on the same angle works best. The only problem tool is the monster spindle rougher that Lacer sells. That is probably getting relocated since I rarely use it anymore.

Ray

Re: Tool Holder

#10

Leo Cuellar

Re: Tool Holder

Leo Cuellar

Thanks for sharing this, Ray. I have an old mechanics stool that no longer uplifts me, this looks like a great second life for it.