Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

DC Motor controller for Penn State lathe *LINK*

Posts

DC Motor controller for Penn State lathe *LINK*

#1

DC Motor controller for Penn State lathe *LINK*

Joe Donohue

A person donated a Penn State Turncrafter Pro VS lathe to our club. It was never used but the motor controller was physically damaged (run over by a truck...please don't ask).

Can someone give me a lead as to where I can buy just the controller? Penn State sells the whole conversion kit including the DC motor for $120 (see link below). I would like to buy the controller only. I really don't want to invest $120 of the club's money in this lathe.

I wrote to P.S. but no response so far.

Can anyone give me a lead?

Thanks

Joe Donohue


Penn State Link

Re: DC Motor controller for Penn State lathe *LINK*

#2

Re: DC Motor controller for Penn State lathe

Don Evans

www.surpluscenter.com

They carry DC variable controllers that will work with this motor.

Some times they have them in stock sometimes not, but they usually have 3 different one's to choose from.

This is a small (1/2 hp) motor so any of their controllers will work, I don't remember the price range but but seems they were below $100.00, I advise getting the braking resistor and the heat sink from them but that is added expense. The controller should last years and can be used for other things in the future. These controllers are for DC motors only and will not run a 3 phase motor for variable, just FYI.

Don

Re: DC Motor controller for Penn State lathe *LINK*

#3

Re: DC Motor controller for Penn State lathe

Joe Donohue

Thanks for the lead Don. It looks like Item# 11-2102 would work fine and even handle motors up to 1 hp. The problem is it is $172.95.

I didn't see any others that would be suitable. Maybe my only option is to buy the PS upgrade kit ($120 - includes the motor, controller and mount kit) and hold on to the spare motor. I really didn't want to spend that much on a marginally designed lathe.

Joe Donohue

Re: DC Motor controller for Penn State lathe *LINK*

#4

Re: DC Motor controller for Penn State lathe

Joe Donohue

Update: Penn State called today and offered to sell me just the controller - $45, which is quite reasonable. It's on the way.

Joe