Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

It Burns! - gloves

Posts

It Burns! - gloves

#1

It Burns! - gloves

darrin hill

k... im tired of burning my hand when holding a tool... right handed so i use my left to steady it.

the particles from the wood are hitting my hand and are hot (like you don't know this)...

but in texas, we don't have gloves cept the stuff u get at lowes.... i don't know if u are using a cast off glove with fingers cut off, or if ur using something store-bought or ?

to me, either gloves are for people with cold weather (which we really don't have) or those big hunky ones i use when working with rock or concrete ...

so what do you guys use?

oh.. and i was spinning a piece of walnut and the tool slipped a bit and the walnut left a small burn on my hand.. so i get hot wood and cut by hot wood...

Re: It Burns! - gloves

#2

Re: It Burns! - gloves

RCH

Golf gloves have been recommended (though I'm not a golfer). The first glove I used was from the pair I used in long ago undergrad days playing handball.

Re: It Burns! - gloves

#3

Mike Stafford

Re: It Burns! - gloves

Mike Stafford

Don't let the wood hit your hand and get burned!

Try changing your grip. One of the things I do when the wood gets hot is hold the tool from above and allow the palm of my hand absorb the hot chips while directing them away from me. The skin in the palm of my hand does not seem to be as sensitive as the skin on the back of your hand or fingers.

You might also try rotating your flute so the chips are flying in another direction. Gouges will cut with different areas of the edge exposed.

You should be able to pick a golf glove at Wal-Mart. I worry about gloves becoming entangled in the spinning chuck or wood so I don't wear one myself.

Re: It Burns! - gloves

#4

Re: It Burns! - gloves

Bob Tabor

I use a fairly heavy duty leather glove with the just enough cut off to expose the first knuckle. Also have a short and close fitting to the wrist as not to have the wood catch it. Since I turn right and left I wear gloves on both hands. What I have now are gloves for a person in a manual wheelchair. Call me if you need to.

Re: It Burns! - gloves

#5

safety issues, but...

GaryG in MD

Many people say that we should not wear gloves when turning.

It's a safety issue.

There are several good reasons for this opinion.

So I'm not going to recommend that you wear a glove.

But, if you're determined to wear one, as noted above, golf gloves are excellent for this application. Make sure you get one that is quite tight. Looseness is definitely part of the safety danger (as is not being able to detect the wind from the chuck when you are too close to it).

...Gary

Re: It Burns! - gloves

#6

Re: It Burns! - gloves

Emmett Manley, Lakeland, TN

Golf gloves work great, if I don't happen to have one (I don't wear one when playing golf) I just pick up old ones on the golf course (look in the trash then wash them) -- the back never wears out and that is where you want protection.

Leather golf gloves fit very tight and will not hang on anything, yet they are thick enough to protect your hand from hot shavings. Do not wear loose cloth gloves.

Re: It Burns! - gloves

#7

Steven Antonucci

Does anyone have a horror story involving a glove?

Steven Antonucci

We repeat the conventional wisdom about loose fitting gloves and rings, and it's probably a best practice to go it barehanded, but I wondered if anyone has actualy had an accident because they were wearing a glove (and it got caught?) I don't think I've ever seen one here?

I use one for roughing drier material, which tends to heat up moreso than green wood. You can also slow your cut or sharpen more often to reduce the heat. For me, it is less about the heat than the wood slamming against my hand during aggressive roughing, and I always have my gloved hand on the tool behind the rest.

Steve

Re: It Burns! - gloves

#8

Re: Does anyone have a horror story involving a gl

Emmett Manley, Lakeland, TN

I recall reading several accounts of glove related accidents and I was impressed that every story involved a drill press, not a lathe or bandsaw. I had never thought of a drill press as being especially dangerous but after those reports I gained respect for the lowly drill press.

Re: It Burns! - gloves

#9

Re: It Burns! - gloves

Mark

You could try bicycle gloves. No fingers, they are padded, and not too expensive. They have half fingers so I do not know if these are safer than full fingered ones.

Re: It Burns! - gloves

#10

Re: It Burns! - gloves

Barry Irby

I wear a leather or goat skin glove with the fingers cut off on my left hand. Find one that is tight to the point of being hard to get on and cut off about half the fingers. Cutting the fingers off will make it easier to put on and off.

I have never had an accident caused by a glove, but I did have one where the glove saved my bacon. I have the bad habit of touching the spinning blank to stop it. I left a VERY sharp edge on a piece and touched it. It cut through the glove like a knife and left a slit about an inch long. It left something like a paper cut on my hand. Had it not been for the glove I might have needed stitches. I still use the glove and let the cut in it remind me not to do that again.

I buy women's gloves to get smaller ones. You can turn the right handed one inside out to make it a lefty.

Re: It Burns! - gloves

#11

Dale Jablonski

Re: Does anyone have a horror story involving a gl

Dale Jablonski

I cut the fingers out of an old well used pair of leather gloves I used fighting fire. (I may have retired one year too soon) Never have a problem with them nor a concern with them getting wrapped up. When I'm sanding I don't use them but for turning they've come in handy and protected my left hand.

Re: It Burns! - gloves

#12

Re: It Burns! - gloves

garyj

I use weight lifters glove from walmart. Tight fitting, padded, fingerless and cheap

Re: It Burns! - gloves

#13

Re: It Burns! - gloves

Bernie Weishapl

I use the weight lifting gloves from wal-mart also. Tight, fingerless and padded. Been using them for about 3 yrs now with no issues. Just stay behind the tool rest.

Re: It Burns! - gloves

#14

If you can't fix it with duct tape...

Scott Crumpton

"If you can't fix it with duct tape, it ain't worth fixing."

Take a square of duct tape, place it centered on the side of your hand where the problem occurs. Now wrap it around only the palm side of the small finger. Then close your hand into a fist and wrap it over the top. There you have it, a heat shield for the side of your hand and no glove to get caught on anything.

---Scott.

Re: It Burns! - gloves

#15

Dick Hines

Re: If you can't fix it with duct tape...

dick hines

Darrian, I bet you have a HD shop not to far away.

Pick up a pair of the fingerless rideing gloves. They even padding.

Re: It Burns! - gloves

#16

Re: If you can't fix it with duct tape...

darrin hill

i would guess you don't have hair on the back of your hand...

:)

Re: It Burns! - gloves

#17

Re: It Burns! - gloves

charlie belden

Lee Valley carries a green, or maybe it's blue. gauze like tape that sticks to itself. Carvers wrap their holding hand fingers and thumb, carving hand's thumb, with it. Gives a decent grip, insulates a bit and sharp cutting edges don't make it through it - unless you really, really, try.

Re: It Burns! - gloves

#18

Joe Fleming

Re: It Burns! - gloves

Joe Fleming

Even with gloves, you will eventually get too hot. I have been watching Mike Mahoney videos lately. He turns WAY more than most of us, but no gloves. He uses an underhand grip. So does Stuart Batty. I know I feel much more control with my hand on top, but if I need that much force to control the tool, I probably need to practice more with an underhand grip and avoid the burn altogether.

Joe

Re: It Burns! - gloves

#19

Mike Stafford

Re: If you can't fix it with duct tape...

Mike Stafford

Scott, I like your idea and recently I went looking for some duct tape and was amazed at all the colors and patterns available. Not only can duct tape be used for temporary protection it can be used to improve our fashion sense. I know my wife would appreciate that.....

She's always saying, "You're not going out wearing those clothes are you?"

Re: It Burns! - gloves

#21

Steven Antonucci

BTW- I made an Indiana Jones bullwhip for my son:)


Re: It Burns! - gloves

#22

Re: It Burns! - gloves

Hugh

Costco had a set of three pairs of leather gloves for around $20. Nice gloves. I cut the tips of the fingers off and put a little super glue on the thread to keep them from unwrapping. I have been know to sew up the cut finger also. Sewing works better/longer. I only use a glove on my left hand ......so I turn the right glove inside out. Six turning gloves for the price of $20. After using for a number of months turning wet wood - the glove will stand there and be a piece of "art" all by itself.

Hugh

Re: It Burns! - gloves

#23

Re: It Burns! - gloves

Don Orr

In a recent "American Woodturner" issue a woman shows in her article on turning colored plywood bowls how she uses blue painters tape on her left hand where the hot/sharp chips hit. I thought it was a great idea and more safe than a glove. And not as tough on the hair on your hand as duct tape. :D

Re: It Burns! - gloves

#24

Mike Stafford

Real men use duct tape!

Mike Stafford

What's the loss of few arm hairs to a woodturner? :b

Re: It Burns! - gloves

#25

Re: Does anyone have a horror story involving a gl

bob davis

me too dale