Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Flat Top HF - Version 2

Posts

Flat Top HF - Version 2

#1

Flat Top HF - Version 2

charlie belden

The Flat Top HF I posted earlier had some shortcomings. So I turned Version 2 with the changes. And while I was at it, I added a finial - in ebony. HF1 was the size of a quarter. HF2 is the size of a nickel.


The ebony finial looked a bit clunky and I wasn't sure about going with a dark finial either. So I got out a smaller detail gouge and turned another finial - in maple - nice and light colored.


A bit more delicate - but I think I can turn a more delicate one.

Now am not sure about going with a light colored wood for the finial, given the red and black of the HF.

So should I go with a light or dark finial, or maybe one out of the same manzanita as the HF?

ps - have got to get a smaller ball tip for the pyro work - AND - wear an OptiVisor magnifier to see better where I'm burning.

Re: Flat Top HF - Version 2

#2

Re: Flat Top HF - Version 2

Don Orr

Charlie-these little pieces you are doing are wonderful. Personally I think the black finial works best. It ties the piece together by uniting the 2 black features. The lighter one seems out of place-to me. A manzanita finial might look good so I guess yo'll have to turn one so we can make a finial(or is that final) decision. :D ;)

Re: Flat Top HF - Version 2

#3

Re: Flat Top HF - Version 2

Bob Macgregor

I agree with Don, the dark finial looks better with that piece.

I was wondering what you had in mind to store in that little box...$1 worth of gold dust, maybe?

BOB

Re: Flat Top HF - Version 2

#4

Re: Flat Top HF - Version 2

charlie belden

As a former jeweler, I know an ounce of gold doesn't take up much space. I'd guess a bit under a quarter ounce of pure gold could fit in the larger of the two flat top hollow forms. At pushing $1,600 an ounce, I could get $400 worth of gold in this thing. A one carat diamond would probably also fit- and a good one could be $1000 or more. I recently found a bunch of little nodular pieces of some sort of resin under a tree at a local park. Looks almost like a red brown amber - perfect for these two pieces.

I agree that a dark finial would look better with the redbrown and black of the hollow form. When I get a finial I like - in inexpensive poplar - I'll probably try doing one similar in African Blackwood, ebony or maybe just india ink one of the ones I have already done.

The most time consuming part of doing these little finials is getting the bottom to fit the opening in the hollow form. Too loose and the finial is easily lost. Too tight and the thin delicate finial is likely to be broken while trying to remove it. Though I COULD turn the bottom cove finer, it's what is grasped, carefully to pull the top off - and not snap the very thin onion's neck. DAMHIKT (Don't Ask Me How I Know This).