Nova 2024
Howard Katz
Does anybody have the Nova 2024. What do you think of it, good points and bad?
Does anybody know when Nova puts their lathes on sale?
Thanks HAK
Knowledge You Can Build On — Est. 1998
Nova 2024
Howard Katz
Does anybody have the Nova 2024. What do you think of it, good points and bad?
Does anybody know when Nova puts their lathes on sale?
Thanks HAK
Re: Nova 2024
Greg Haugen
Howard,
Nova usually has a sale through Woodcraft around Oct. as a year end inventory reduction. Watch upcoming Woodcraft flyers.
Greg
Re: Nova 2024
Dave Paine
I have only seen Woodcraft advertising sales on Nova lathe's. Does not mean other places do not have sales, I just get few flyers.
The most recent Nova sale at Woodcraft was back in March and if I recall was a specific model, and accessories.
Have you seen the 2024 "in the flesh". I was surprised how tall it is. Too tall for my use, I would need a platform. I think they used the same stand height, but the middle of the headstock is now 4in higher.
I did not like the finish on the one I saw at my local Woodcraft. The castings were rough. I have the DVR and it has smooth castings with the hammered metal paint.
The stand is not as beefy as it appeared in the picture. Sheet steel panels join the legs.
Re: Nova 2024
Alan Zenreich
Just a little math.... all other things being equal, a 20" swing would move the center 2" higher than a 16" swing
Re: Nova 2024
Dave Paine
My oops, was not thinking, you are correct, it is "only" 2in higher, but in the store it seemed much higher than my DVR. Not sure how much is the extra swing or the fact the DVR stand is home made.
Since the 2042 comes with the stand, it is worth checking the height before buying.
Re: Nova 2024
Terry Scott
Howard drop me an email and Ill send you an article that was just written here by Dick Veitch 'He was one of the first in Nz to get a 2024
I was turning on one at the AAw so also may have some input