Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

JCCFS misadventures...

Posts

JCCFS misadventures...

#1

Mike Stafford

JCCFS misadventures...

Mike Stafford

Teaching a class of woodturners is one of the most enjoyable things that I can do. Sometimes I am surprised by what some of the students try to do on the lathe.

Yesterday afternoon I was surprised. I was making my rounds up and down the aisles and WC denizen Don Leydens decided it was time to slice the ice cold watermelon that he had brought for an afternoon snack. To say he was trying to do it in a most unusual way is an understatement. Normally what happens at John C. Campbell stays at John C. Campbell but this was too good to pass up..... I took the gouge out of his hand and handed him the proper tool which of course is a skew..... :D

Along with Don, Jamie Donaldson, Joe Bradshaw and George Taylor are other WC regulars who are helping to populate the class. We are having a wonderful time and each evening we are having a great time doing enrichment activitities with various vintages of the fruit of the vine.


Re: JCCFS misadventures...

#2

Re: JCCFS misadventures...

Ken Oakley-Sunny St. Cloud, Fla.

Brings to mind the old adage, "you don't have to be crazy to be a -----------, but it helps"

Re: JCCFS misadventures...

#3

Steven Antonucci

Seems like a good idea until you hit a pit...

Steven Antonucci

Did you overcome that by buying seedless watermelons?

If you think you're ever going to turn it on, make sure you have video recording and a lawn chair out of the line of fire (wherever that happens to be with a watermelon on two chucks?)

I'd pay to see that.

Steve

Re: JCCFS misadventures...

#4

Re: JCCFS misadventures...

Don Wilcut

Mike, I was waiting for a class picture. But I guess this will have to do.

Don

Re: JCCFS misadventures...

#5

Re: JCCFS misadventures...

Pete in Holland

So.....you've never been to a antique tractor show where they slab off watermellon slices on a sawmill driven by a steam engine ?

Re: JCCFS misadventures...

#6

Re: JCCFS misadventures...

robo hippy

No skew, you need a vacuum chuck and a deep parting tool.

robo hippy

Re: JCCFS misadventures...

#7

Re: JCCFS misadventures...

Lan Brady

There is no way Don painted that green color all by himself!!!!

(inside joke)- lol, looks like fun!

Lan

Re: JCCFS misadventures...

#8

Jim Barbour

Re: JCCFS misadventures...

Jim Barbour

So Mike, I presume the next step would be to hollow the halves and re-glue it to form a sphere, a la John Morris?

Re: JCCFS misadventures...

#9

I am totally innocent of such.......

JamieDonaldson

.......shenanigans, as y'all know I would never capture such an act in an image with direct flash, rather than more natural ambient light! :D ;)

Re: JCCFS misadventures...

#10

Mike Stafford

Re: JCCFS misadventures...

Mike Stafford

You are so correct Reed. A thin parting tool would be much easier to control.

I have been blessed with a fabulous class this week. We are making a lot of progress and having a lot of fun. Thank goodness Jamie is here to help maintain order.

Those of you who know Don realize that he is a handful by himself.

Don Wilcut, I am hoping I can remember to take a class picture today. I cannot promise of what quality it will be as I do not have an ugly filter or wide angle lens....... This is a bunch of old woodturners after all......

Re: JCCFS misadventures...

#11

Re: JCCFS misadventures...

Dale Miner

I've done that with my 1/2 scale sawmill and half scale steam engine. Always a big crowd pleaser. Makes a mess though, and it takes a 1/4" for every slice. Still, on a hot day an ice cold slice of melon is just the ticket.

Re: JCCFS misadventures...

#12

I want to see the after he cut picture!


Re: JCCFS misadventures...

#13

Re: I want to see after he gets a catch