Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

New Powermatic *LINK*

Posts

New Powermatic *LINK*

#1

New Powermatic *LINK*

John Lucas

If only I was rich. :) I love my 3520A but everyonce in a while I wish for more swing. Usually for turning square stock or for off center work. I doubt I'll ever turn a 24" bowl. My only concern would be the weight of the tailstock. I think they said it would sell about 7 grand. Can't tell you how many cars I owned that didn't cost that much.


http://www.powermatic.com/Products.aspx?Part=1794224K

Re: New Powermatic *LINK*

#2

Re: New Powermatic

John Kaner

John,

I have the older now, Powermatic 4224. The tailstock is built like a tank! The new tailstock looks like a 3520 one.

Sliding headstock, vacuum pump and compressor, moffat lights and 4 gang outlet!

I use a moffat light and a homemade 4 gang outlet mounted to the protective cage bracket. The cage is living on a hook on the garage ceiling...

Re: New Powermatic *LINK*

#3

Re: New Powermatic

Dick Coers

I have only turned on one 4224 and the thing that impressed me the most was the weight of the tool rest. You have to lean into that thing to get it to move on the bed. I also didn't like that huge square head. But, it's a tank to turn that size of material. Not turning big stock on this lathe will make it a chore.

Re: New Powermatic *LINK*

#4

Dick Hines

Re: New Powermatic

Dick Hines

Jonh. it's only $7600. My 1967 Mustang only cost $2600 and I though that was All the money in the world.

Re: New Powermatic *LINK*

#5

Brad Vietje

Re: New Powermatic

Brad Vietje

Nice -- and about time!

I have the 3520-B, and think it's probably the best all-round value on the market for a full-sized, general-duty lathe. I looked at the 4224, but for my type of turning (mostly hollow forms and bowls), I wanted the sliding head stock so I wouldn't be leaning over the bed all day.

I thought the 24" swing of the 4224 without the sliding headstock was an unfortunate limitation. The 4224-B with the slider solves that problem, but they need to get the price down to a more reasonable level, IMHO.

Safe spinning,

Brad Vietje

Newbury, VT

Re: New Powermatic *LINK*

#6

You Deserve It John, Go For it!!


Re: New Powermatic *LINK*

#7

bicycles more expensive than your car

John Lucas

There was an article once in a bicycling magazine about guys who owned bicycles more expensive than their cars. I expected to see some really incredible bicycles. What they actually had were really crappy cars and nice bicycles.

I have a lathe that is more expensive than many of my cars. It's not a really expensive lathe I've just had mediocre cars. :)

So maybe I need to buy a more expensive lathe and then try to buy a car better than my lathe.

Re: New Powermatic *LINK*

#8

Re: bicycles more expensive than your car

charlie belden

My youngest, now 35, has been cycling since he was about 10 - first road biking then mountain biking, cyclo cross, track and back to road biking. When he got his first car, a $2500 '75 VW GTIm he already had a $3,500 titanium frame mountain bike (he was on a local bike shop's juniors team). Twenty years later he was working for LOOK, and had a bike with a $7000 carbon fiber frame and another $2500 in rims, carbon fiber ribbon "spokes", disc brakes, high end derailer - and a $350 saddle (that's a bike seat to the rest of us), Of course by that time, his car was about $30K.

On a Price Per Pound Basis, my $6K combination machine ( table saw, shaper, joiner, planer, horizontal mortiser / boring ) is a real deal relative to high end bicyles ; )

Re: New Powermatic *LINK*

#9

Re: New Powermatic

Craig Daymon

I think I'd still be going for a Robust "American Beauty" in that price range.

Now if they offered a 3520B with a 3HP motor (I think this use to be an option) and the remote on/off (which really should be standard on a lathe with a sliding headstock), they could get my interest.

I had a 3520A and it was a great lathe. A "B" with 3HP, remote switch and a bed extension/tool rest extension mounted lower for turning really big, or switching it to extend the bed. That would be a pretty good arrangement.

I turned a couple large platters on the 3520A and it was fun. I'd like to do more. No space, 220 or $$$ for it right now.

-Craig