Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

This miniature thing is getting CRAZY

Posts

This miniature thing is getting CRAZY

#1

This miniature thing is getting CRAZY

charlie belden

A lidded vessel, in plum and cherry




Having done some little platters, bowls and hollow forms, the next step on this insane path logically seemed to be a lidded vessel. Alas, the finial I was doing snapped off when I applied a little too much pressure while sanding to final shape.

Here's the piece - on a dime




Not Gallery Quality and certainly not refined to the Nth Degree, but a fun little, very little, piece.

Wonder how some piercing or pyro work could be done at this scale?

Re: This miniature thing is getting CRAZY

#2

Re: This miniature thing is getting CRAZY

Jim H

That's great Charlie. Is the inside finished to MM 20k? All kidding aside, wish I could get this off my lathe.

Re: This miniature thing is getting CRAZY

#3

Charlie, toothpicks make good stock.....

JamieDonaldson

...for turning tiny finials! :D And now you need to work on your macro photo set-up, so we can check out your sanding and finishing quality. ;)

Re: This miniature thing is getting CRAZY

#4

Re: This miniature thing is getting CRAZY

Keith Newton

Hey Charlie, I hope you are not going out spending a lot of money for these materials. If so, I could sweep up around my saw and send it to you. There would probably be a lifetime supply out there.

When are you going to start laser etching them?

Re: This miniature thing is getting CRAZY

#5

Re: This miniature thing is getting CRAZY

charlie belden

Old broomsticks are often made of old growth pine - with nice tight grain (52-70 growth rings per inch). Any home owner who has been in one house for 10 years or more usually has old broom sticks around, even when the broom part is no longer useful.

I'd try toothpicks - if I could figure out how to hold them for turning. I've got a lot of old jeweler's engraving tools and small dental tools that could be used to turn REALLY small. But there is a point at which there's not enough in really tiny pieces to show grain or even color. That's when things go from "Oh wow!" to "HUH!?"

As I hypothesized early, there seems to be a different set of aesthetics for really small piece than those for regular sized pieces.

IBM researchers have been making nano objects built an atom at a time. But you need a scanning electron microscope to see them.

Re: This miniature thing is getting CRAZY

#6

Re: This miniature thing is getting CRAZY

John Lucas

Charlie I use what's called a pin collet chuck. About the size of a pencil with different collets that let you hold very small round or square pieces. I chuck that up in my long jaw chuck that goes down to 3/8" and holds the pin chuck.

I've found tooth picks aren't the best material. It's better to rive or split small splinters off of hard woods. That way the grain runs the full length of the tiny spindle blank. Grain direction gets really important when your turnings get truely tiny.

Re: This miniature thing is getting CRAZY

#7

Re: This miniature thing is getting CRAZY

David C. Lykins

You need to contact Neiman Marcus or those "High End" stores that sell $5000 doll houses, or who ever makes furniture for them. I'm sure your work would look awesome in those little homes.

I worked for Wood Craft part time several years ago and one of the older gentlemen used to make VERY high end doll houses, some costing over $10,000.

Wonderful work!

Re: This miniature thing is getting CRAZY

#8

Re: This miniature thing is getting CRAZY

charlie belden

Yes, the jar is hollowed.

An advantage to turning small is that folks can't put their finger inside to check the wall thickness ; )

Re: This miniature thing is getting CRAZY

#9

Re: This miniature thing is getting CRAZY

charlie belden

What I need to look for is a watchmaker's lathe. They're made to turn really little things. Since Timex began making cheap watches, watchmaker's stuff has become available at inexpensive prices.

Now if I could just pick up a diamond cutters indexing fixture I could get into miniature ornamental milling ; )