Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

To Quote Gene Autry (who?!)

Posts

To Quote Gene Autry (who?!)

#1

To Quote Gene Autry (who?!)

charlie belden

"I'm back in the saddle again."

After a three month long hiatus due to a stuck chuck and several micro crisis and mini panics, I got the chuck unstuck and got back to turning again.

A new pseudo adoptee, almost nine, discovered SHE needed a Magic Wand - and I was to make it for her : )

Took a while to get the rust off by skew turning skills. After it was turned I needed to turn something other than another wand. With plenty of small pieces of all sorts of wood, none big enough for a Real Piece, and since small spindle turning is easy to pick up - some small bowls seemed like a good idea. Little wood needed, a catch on a 1 inch diameter piece ain't traumatic, and if I blow it - very little precious wood lost.

Now if turning is the Crack Cocaine of woodworking, turning little bowls must be whatever is quicker - twenty minutes start to finish - literally all the way to polishing.

You've got to try turning small stuff. Great for prototyping - and the resulting pieces don't take up much shelf space at all.

(the smallest piece is sitting on a dime.


The depth of field at this scale is kind of limited so here's two shots that show the profiles.




Try it - you'll like it!

Re: To Quote Gene Autry (who?!)

#2

Dennis in Southern Oregon

Re: To Quote Gene Autry (who?!)

Dennis in Southern Oregon

Nice Charley, you even managed to get some interesting grain patterns in the tiny pieces.

Dennis

Re: To Quote Gene Autry (who?!)

#3

Re: To Quote Gene Autry (who?!)

john lucas

Charlie I just did a doll house scale miniature demo for a woodworking club in East Tennessee. I turned about 6 or 8 things and had a ball. I had my new Nikon D5100 set up to project the images on a big 10 foot screen so they could all see what I was doing. To them it looked like I was turning full size pieces with large tools.

Re: To Quote Gene Autry (who?!)

#4

Ellis Walentine

For our information....

Ellis Walentine

... how do you chuck up the wood to make these pieces? Do you reverse chuck them to finish the bottoms? I'm always looking for fast ways to do things.

Ellis

Re: To Quote Gene Autry (who?!)

#5

Re: For our information....

charlie belden

Turning these little things is addictive - kind of like potato chips. Can't turn just one.

Here's 22 more (I htink I counted right)



And here are the tools I've been using (along with 240, 320, 400 and 600 grit sand paper)


Finally, here's a quick and dirty illustration of the process I used. As always, questions, comments and suggestions welcomed.