Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Utah Woodturning Symposium

Posts

Utah Woodturning Symposium

#1

Utah Woodturning Symposium

Fred Holder

I haven't noticed anyone posting about the Utah Woodturning Symposium in Orem, Utah last week. I felt it was a great symposium again this year. I've been to it each year since 1997 if that is any indication of how much I like this symposium. It is not as large as the AAW Symposium, I think there were about 400 people this year, but the demonstrations are good and so is the facilities.

I'd be interested in hearing what others think of this symposium.

Re: Utah Woodturning Symposium

#2

Ellis Walentine

On my bucket list

Ellis Walentine

Fred, I wish I could have been there. I've heard a lot of good things about the Utah symposium. We'd be interested in hearing your recap of this year's event, or maybe a bit about how the symposium has evolved over the years.

Ellis

Re: Utah Woodturning Symposium

#3

Re: On my bucket list

Fred Holder

Hello Ellis,

I could write pages and pages about the Utah Woodturning Symposium, but here is a condensed story. I hope it is not too long.

My introduction to the Utah Woodturning Symposium was in 1992 when the AAW had their symposium jointly with the Utah event. My father in law and I went to that one. I had never witnessed another turner turning wood. I sort of walked around with my mouth open. But that was my introduction to the Utah

Woodturning Symposium. I got to meet some of the people I had read about, like Richard Raffan, Bonnie Klein, and Ray Key. I didn't have time to attend another until after I retired and started More Woodturning magazine in October 1996.

My big adventure in early June 1997 was to attend the Utah Woodturning Symposium in Provo, Utah again on June 5, 6, and 7. I was just one of the 319 participants and 22 demonstrators in attendance. There were 10 rotations— each about 1-1/2 to 1-3/4 hours in duration and each rotation had 10 areas in operation simultaneously. This made a total of 100 demonstrations during the event. Unfortunately, one simply couldn’t see everything. I had to pass up seeing people like Richard Raffan, Ray Key, Bonnie Klein all excellent demonstrators, I had seen before, that I would have liked to watch again, but I wanted to see people that I had never seen like Soren Berger of New Zealand, Allan Batty of England, and Bill Jones of England. If you want to see all of the demonstrators at one of these events you have to jump around between sessions and miss a lot of important things by so doing. I chose to select an area for each rotation and stay from beginning to end.

Now to jump forward 10 years to 2007, I had attended all of them between. The Utah Woodturning Symposium is the longest running woodturning symposium in the world. The year 2007 marked the 28th anniversary of the event. Participants could select from over 100 demonstrations given by some of the best woodturners in the world. The presentations had something for everyone, from the beginner to the professional. This symposium is open to anyone with an interest in woodturning and has been a favorite of mine since 1997. The symposium was held at the Brigam Young University in Provo, Utah in two buildings on the campus. There were 10 demonstration areas and 10 rotations during the three days of June 21 through 23, 2007. Plus, seven evening demonstration, the Great Egg Cup Race, the Swap Meet, and a Barbecue at Rock Canyon Park on Friday evening. And, of course, the Instant Gallery with hundreds of beautiful pieces of turned wood, stone, and plastics. There were 22 regular scheduled demonstrators plus Stuart Batty who did one evening demonstration on everything about the bowl gouge.

Now jump forward five years to 2012. The Utah Woodturning Symposium was held on May 17-19th, 2012 at the McKay Events Center in Orem, Utah. There were over 80 demonstrations to choose from and a full schedule of Special Events. There was something for everyone! The 2012 Demonstrators include: Nick Agar, Sally Ault, Trent Bosch, Rex Burningham, Kirk Deheer, Douglas Fisher, Brian Gisi, Kurt Hertzog, Allen Jensen, Stuart King, Mike Mahoney, Art Majerus, Guilio Marcolongo, Brian McEvoy, Johannes Michelsen, Stuart Mortimer, Ken Nelsen, Dale Nish, Binh Pho, Richard Raffan, Malcolm Tibbetts, Joe Wagner, and Tom Wirsing. No matter how one tried, there was no way that one person could see all of these demonstrators do their thing. Over the years, the instant gallery has become more and more artistic. Also the location in the McKay Events Center is a nicer location in my opinion. This year Dale Nish put a large number of pieces of his collection in the instant gallery, which was quite interesting.

I forgot to mention that Craft Supplies USA has a Super Wednesday day before the Symposiums start. It is like an addidional day of the symposium. They always have a close out sale with excellent prices where you can be mobbed when the door opens. Over the years I've picked up some real bargins. They also generally have about 10 areas with demonstrations that are very good. They are of course demonstrating tools and things that Craft Supplies sells, but they are generally good demonstrations.

Re: Utah Woodturning Symposium

#4

Re: Utah Woodturning Symposium

George

I was there too for my first time (I am a new turner). I enjoyed the symposium, learned a lot and plan to go again in the future.

Re: Utah Woodturning Symposium

#5

Re: Utah Woodturning Symposium

Mark Wollschlager

I attended last year for my first time.

It was a very well run event, very collegial atmosphere.

The organizers and long time attendees are very welcoming, it can seem clubby at times.

I was able to take meals with some really nice folks and got to talk with some world renowned turners.

It was a lot less hectic than the AAW symposium.

The location in Orem is pretty nice. Beautiful mountains everywhere.

Being the West, you need access to a car, but there is a lot in the vicinity of the events center.

This year events conspired to keep me away, but it is on my to-do list for next year.

mark

Re: Utah Woodturning Symposium

#6

Re: Utah Woodturning Symposium 2 times

Terry Scott

Ive been to the Symposium 2 times as a demonstrator (only doing 3 rotations I was able to sit on a number of demonstrators who have influenced my work today big time )

Id recommend you put this event on your bucket list .Ill be at the AAw for the first time this year but from what I hear the Utah gig is smaller and a top on most attendees list.

Re: Utah Woodturning Symposium

#7

barry rockwell

Re: Utah Woodturning Symposium

Barry Rockwell

Fred. I attended the Utah Symposium this year, and it was a pleasure to see you and Mildred again. As a matter of fact, you were in the room next to mine at the hotel. Hope my TV didn't bother you. This was my second year at the symposium and as a relatively new woodturner, I am still blown away by the talent and skill of the demonstrators and those with pieces in the instant gallery. The demonstrations I attended were all incredibly informative, educational, and great entertainment. It was very difficult to choose between the various rotations, and I didn't get to see some of the ones I really wanted to. The instant gallery was an inspirational experience, and I took pictures of most of the pieces there and met a lot of the artists. It's amazing to find that some of the greatest woodturners on the planet are just "real people". The only dissapointment I had was with the DVD i bought that was supposed to be of all the pieces in the gallery. I thought the photography was poorly done, lighting was poor some of the time, and they seldom showed a whole piece. Other than that, it was a great experience, and one that I will try to repeat in years to come.

I have been a subscriber to "More Woodturning" almost since I began turning, and find it very enjoyable. Best wishes to you and Mildred, and I hope to see you at the Desert Woodturning Roundup in February, 2013.

Re: Utah Woodturning Symposium

#8

Ellis Walentine

Thanks for the excellent recap, Fred.