Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

My spalted maple box

Posts

My spalted maple box

#1

My spalted maple box

john lucas

Roger I had very little time to turn this morning. I start an 80 hour week at noon today and had to mow the grass. However you really peaked my interest in whether I could turn a box I liked out of a small scrap of maple. The maple is 3" tall. I glued it to a scrap block so be able to turn it this size.

The lid is a scrap of cherry (I never throw anything away there might a macro goblet in there somewhere). I dyed the cherry black with shoe dye and then rubbed it back a little with 4/0 steel wool so you could barely see some brown and the grain which makes it look just like some types of ebony. It is not a press fit lid it just sits in the opening.

It's a good thing I'm a professional photographer and have tons of equipment at my disposal. I shot this using 8 - 2'x4' flourescent soft boxes, more commonly known as office ceiling lights. I simply layed it on a white seamless paper background and set my white balance on the camera for the Flourescent setting. Exposure was 20 seconds at f20 handheld. If you believe that I have a bridge for sale.



Re: My spalted maple box

#2

Dick Hines

Re: My spalted maple box

Dick Hines

Great box JohnNever throw the scraps away. You never know what is inside.

An 80 hour week!! I guess we will not be seeing much of you for a while.

Re: My spalted maple box

#3

Re: My spalted maple box

Roger Chandler

Very nice John..........impressive actually..........I hope you did not think I was saying that your previous suggestion could not be done.........just not for the form I wanted to do with that piece of spalted maple.........

We have no disagreement - I embrace the concept of your original thread, and appreciate that you went to all that trouble to make a box to show me it could be done! Wow..........did I hit a nerve or something?

You have demonstrated what you said...........I do not know if I conveyed well what my thinking was........again, no disagreement here.........I certainly understood what you said about a different style of box and getting the lid from that blank with a smaller box......that works....I just had something bigger intended for that blank, and wanted to carry it to completion.....even if I sacrificed the overall look a bit with the walnut.

I will say this, your lid that was ebonized looks good with yours.......that big dome on mine with all that black likely would have overpowered the box too much...........hopefully, I will do better next time! Again........thanks a bunch!!!

Re: My spalted maple box

#4

Re: My spalted maple box

Bernie Weishapl

Really nice box out of scrap John. It amazes me what you find in small scraps.

Re: My spalted maple box

#5

Re: My spalted maple box

matt overton

Beautiful box. What are you going to do with the other 86 hours this week?

Re: My spalted maple box

#6

Re: My spalted maple box

john lucas

Well actually I'll be at the computer a lot downloading photos. It's called American Legion Boys State. We shoot everything they do from about 7am until 10 every day through noon next saturday. We run out shoot a bunch of stuff and then come back and try to get it all downloaded. I just took a short dinner break and now headed down to do 600 or so headshots for the Boys State Annual, then I have to shoot the Evening orientation and memorial service. I'll probably get home about 9 tonight. So even though I'll be able to check in with WC I won't be in the shop at all. Heck I'll hardly be home except to sleep.

Re: My spalted maple box

#7

Re: My spalted maple box

john lucas

Roger You didn't hit a nerve at all. I simply wanted to spend some time in the shop before my long week and trying to make a box like I saw in my mind after your post seemed like a good challenge. So don't even remotely think I was picking on you or thought you had done something to me. Were just two turners having a friendly discussion. I just thought it would be fun and possible a good teaching situation for other to learn from out playing around with boxes.

Re: My spalted maple box

#8

Don't know, got any suggestions?


Re: My spalted maple box

#9

great box, John...

GaryG in MD

I really like it -- simple and elegant.

Love the chatter work on the inside and outside of the lid -- really makes the total package sophisticated. Great "finial" knob too. Nice work.

I was at Boys State in SD in '61. It was a great experience. ...Gary

Re: My spalted maple box

#10

Dan John, your schedule sounds like ......

JamieDonaldson

...most of my 9 month work schedules during my photography days! And you don't even have to soup the film or make overnight color prints for magazine deadlines! Winter was always welcome so that we could get some sleep!

Re: My spalted maple box

#11

Keith Tompkins

Re: My spalted maple box

Keith Tompkins

Hi John, Great box! I especially like the way you inset the lid...that's exactly how I make my boxes. That way, the lid doesn't interfere with the design of the box.

Re: My spalted maple box

#12

Re: My spalted maple box

DickL in Tampa

20 sec hand held. That's amazing. I used to be able to do 1/15. But that was in the ASA 60 Ektachrome days. Not so much any more. :)

Re: My spalted maple box

#13

Re: My spalted maple box

George Van Beynen

Well done John. The lid with its texturing and the slight buff back toward brown make this perfect for the spalted maple. Everything works!

Re: My spalted maple box

#15

Re: good shape

Bill Noce in Northeast Ohio

Very nice box John, Like the lid texture and the shape.

Re: My spalted maple box

#16

Re: My spalted maple box

DickL in Tampa

Um. That would be 64 of course. No memory problems here. I do like the box - top looks right to me.

Re: My spalted maple box

#17

Mike Stafford

Re: My spalted maple box

Mike Stafford

Great looking box, John, reminiscent of the boxes my dear friend Ed Moore used to make.

Would you care to share how you hold the lid for initial and finish turning? Ed used a wooden split ring arrangement that allowed it to be gripped by the chuck without damaging the outside of the lid.

Re: My spalted maple box

#18

Re: My spalted maple box

Don in Central Illinois

Mike, don't want to hijack this thread, but can you explain the split ring?