Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Friday topic: fixing "mistakes"?

Posts

Friday topic: fixing "mistakes"?

#1

Steven Antonucci

Friday topic: fixing "mistakes"?

steven antonucci

How many of you have made something like a handle, fixture or jig that works "well enough", but you know it could be better? Who among the WC crowd has actually gone back and "fixed it"?

I have a handle that I made on a bowl gouge years ago that was just too big for my tiny little girl hands, so I never used it. One day, I pulled it out of the handle and recut it to fit. I still rarely use it, but it fits my hands now.

Any other examples?

Steve

I can see the weekend from here...

Re: Friday topic: fixing "mistakes"?

#2

Re: Friday topic: fixing "mistakes"?

john Veerkamp

I have often "fixed" turned utility box lids for fit. Larger boxes like my coffee filter boxes [ 2" X9" ] sometimes move more than anticipated in weather changes. Easy with remounting.

Re: Friday topic: fixing "mistakes"?

#3

Re: Friday topic: fixing "mistakes"?

Wally Dickerman in Arizona

Years ago I turned a pair of candle holders for my sister. She liked them but they just didn't look right to me. Every time I visited my sister, those candle holders glared at me. Finally, several years after I'd turned them, I took them home, mounted them on the lathe and did a little tweaking. I had to do some refinishing of course. Now when I see them, they smile at me.

Re: Friday topic: fixing "mistakes"?

#4

Re: Friday topic: fixing "mistakes"?

Dan Jechura Temperance Mich.

25 some years ago I turned my 1st bowl & lid. It looked ok but I really did not do well with the finish turning. I polyed it and sat it on the shelf and it never really look right. So now 25ish years later and a new lathe I remounted the bowl & lid and changed it a little. Now it looks better (to me). The bad part about it is someone else has seen the bowl and wants to buy it. Not my 1st bowl.

Dan

Re: Friday topic: fixing "mistakes"?

#5

Re: Friday topic: fixing "mistakes"?

John Lucas

Steve I'm trying to turn things around this year. For the last year or so when I pick something up and think, I don't like this or that, or why am I doing this every time, I change it. When I do that I put it on a list and change it. It's made a big difference but I still have a very long way to go. I'm talking about everything from every time I put a clamp up on it's rack I have to shift things, so I re organized the rack to simple things like when you go to a drawer and expect to find a ruler but later find it somewhere else. I move it to point A because that's where my mind thought it should be.

I kept thinking for the last year I should make by big scraper into a negative rake scraper. I started that about a month ago and I'm slowly converting it by regrinding it every time I sharpen.

Re: Friday topic: fixing "mistakes"?

#6

I dnt mak mistaeaks why fx em


Re: Friday topic: fixing "mistakes"?

#7

Me needer!! Ewe are hilloriously

Denis

funny!