Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Fibonacci Maple, a little gloat

Posts

Fibonacci Maple, a little gloat

#1

Fibonacci Maple, a little gloat

Mike Foster

Well I posted this piece a while ago, but not sure if I posted it here. T he response it has received has more than astounded me. It was selected for a show of some of my work (along with a bunch of other artists) at a local art museum.

http://www.brattleboromuseum.org/exhibi ... -exhibits/

I was reading some of the junk mail I get a few months ago, and one was a call for entry in Woodcarving Illustrated magazine. I looked at it and thought, what the heck. There was no entry fee, so I entered this piece, along with a few others that I had done some carving on. Well there were over 600 entries and I really did not have any expectation that my work would get much notice as there are some really wonderful carvers out there. To my astonishment I made it into the finals in the category I entered (open). I don't expect to win even within the category as there is just too much other really outstanding work that was submitted. But..... you can all check out their website and vote if you feel inclined. I'm just saying....

http://www.woodcarvingillustrated.com/f ... e-now.html

Anyway, as I stated when I first posted the pics of this piece. It was really a trial at doing such a carving. I got the idea from watching a Michael Kehs demo and decided to give it a try. It was my first leaf piece and there are some things I would definitely do better if I were to try again. I am REALLY flattered that it made it into a museum display and now the finals of a carving competition. My wife owns it and is not giving it up (although she consented to loan it to the museum for the show). Who knows, I may do another some day.


Re: Fibonacci Maple, a little gloat

#2

Keith Tompkins

Re: Fibonacci Maple, a little gloat

Keith Tompkins

Good stuff Mike...good seeing you at Derry. BTW all....Mike did a wonderful demo at the New England Symposium, his first but certainly not his last! I met Mike Kehs as well, we had a great time.

Re: Fibonacci Maple, a little gloat

#3

Re: Fibonacci Maple, a little gloat

Jim Breeden

Beautiful! And that is the best word I can find anywhere, and wishes I could someday.

Re: Fibonacci Maple, a little gloat

#4

Steven Antonucci

Good piece... and a question

steven antonucci

I noticed that it seems to be popular to make leaf pieces with maple leaves? Why not pick a leaf with fewer lobes? I mean, heck, if you want to make it hard, make the leaves ornamental Japanese maples!

I would start with a cherry leaf without the ridges :)

Steve

Re: Fibonacci Maple, a little gloat

#5

Re: Fibonacci Maple, a little gloat

Mike Foster

Thanks Keith. It was great to see you again as well. Your work has always been an inspiration for me and I'm glad we've had a chance to get acquainted. We'll see about more demo's. One of my major constraints is time, which right now is pretty scarce.

Re: Fibonacci Maple, a little gloat

#6

Speaking only for me,

Mike Foster

the choice of leaf was not a question. First, I knew no better as I had never carved a leaf before. Second, the wood I was using was sugar maple. Third, I had an unlimited number of sugar maple leaves for templates from our woods. Just seemed to be the appropriate thing.

Re: Fibonacci Maple, a little gloat

#7

Beautiful work, Mike...

GaryG in MD

Congrats! Can't wait to see more... ...Gary

Re: Fibonacci Maple, a little gloat

#8

Re: Fibonacci Maple, a little gloat

john lucas

Mike Very wonderful as your work always is. I have a question. What did you use to undercut the leaves. That's always the hardest part for me. They appear to be very deep in the photo. On the few carvings I've done with overlapping parts the had to be under cut even 1/4" was difficult.

Re: Fibonacci Maple, a little gloat

#9

Re: Fibonacci Maple, a little gloat

Hal Taylor

I second John's comments and question. Your piece is fabulous which certainly deserves recognition. Congrats on being picked.

Re: Fibonacci Maple, a little gloat

#10

You're far too modest Mike!


Re: Fibonacci Maple, a little gloat

#11

Re: Fibonacci Maple, a little gloat

Mike Brazeau

Beautiful work Mike. You have been doing some amazing pieces in recent times. Do you find the years of dental work an asset when carving? I think of you every time I am in the chair and the topic of woodturning comes up with my dentist and her assistants. They have seen me a lot over the years and know of my hobby. Opps reminds me - have to get a bird house done that I promised for the receptionist!

Re: Fibonacci Maple, a little gloat

#12

Fantastic Piece!

Don Orr

I know you're being modest Mike, but you are probably the only one here that is surprised by the recognition this piece has received. Your skills and talents are superlative and I would be thrilled to have half of them.

Well done and congratulations! I also enjoyed your demo very much.

Re: Fibonacci Maple, a little gloat

#13

Re: Fibonacci Maple, a little gloat

Mike Foster

Thanks John. Undercutting was a pain for me as well. I have a plethora of different motors/drives and bunch of different kind of cutters and will use whatever works. I keep searching, but have yet to find an easy way to get into these areas. For larger amounts of wood removal, I will use the kutzall type of structured carbide cutters. I have a few of these with 1/8" shanks and about 1/4" diam that tapers down. They work pretty well, but leave a rough surface. I find that the burs that are similar to stump cutters work well. I don't like the extra crosscut in the stump cutters as they leave a rougher surface than the plain ones. Again, these are mostly 1/8" shanks, and I have some about 1/8" in diam. at the cutter end. Once these are too big, I really struggle. I've used small ball cutters, and small dental burs (with 1/8" shanks again). The real fun begins when trying to sand/smooth the cut surface in these tight areas. I use slotted mandrels, small flap wheels, the 3m radial discs, blue stones sold for smoothing carvings..... I have yet to find an easy solution. I have been reading a carving forum recently and some of the folks that do netsuke (small exquisite japanese carvings) in wood talk about using a good sharp scraper as the answer. That is on my list to try the next piece I do.

Remember John, your asking a carving novice. You probably know as much or more thanI do.

Mike

Re: Fibonacci Maple, a little gloat

#14

Re: Fantastic Piece!

Mike Foster

Thanks Don, I'm really glad you liked the demo and hope others did as well. I look forward to the next time we cross paths.

Re: Fibonacci Maple, a little gloat

#15

Re: Fibonacci Maple, a little gloat

eliot d

Oh, this one is a cut above.