Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

my mirror supplier changes sizes

Posts

my mirror supplier changes sizes

#1

my mirror supplier changes sizes

John Lucas

I didn't even think to measure the new mirrors. They are now an odd size, 4.093". That's not exactly metric and certainly not inches. Oh well I'll have to change my go/nogo gauge. Had to put a mirror blank back on the lathe backwards and open up the opening a little more.

Re: my mirror supplier changes sizes

#2

Re: my mirror supplier changes sizes

Randy Gleckler

Well that's no fun to discover. Good thing you've done 1 or 2 of them and know how to make adjustments. :-D

Re: my mirror supplier changes sizes

#3

Re: my mirror supplier changes sizes

Galen Vetterick

Just great! Now if I order a mirror from you I'll get charged for a retooling charge plus more for the basic mirror since it is a full 0.093" larger. :D

Re: my mirror supplier changes sizes

#4

Re: my mirror supplier changes sizes

Philip Duffy

could you share the name of your supplier? Thanks, Phil

Re: my mirror supplier changes sizes

#5

Mike Stafford

As Americans get larger....

Mike Stafford

in girth it only follows that mirrors will also have to grow to accommodate their expanding image...... :D

Re: my mirror supplier changes sizes

#6

Re: my mirror supplier changes sizes

Barry L Elder

Probably your mirror supplier changed mirror suppliers! :D

Re: my mirror supplier changes sizes

#7

Hard to get any sympathy for this group!!

Steve Criscenzo

Could be just bad quality control for this batch. Be sure to check the next batch

Re: my mirror supplier changes sizes

#8

Steven Antonucci

Their diamond wheels have worn .00465"


Re: my mirror supplier changes sizes

#9

Re: my mirror supplier changes sizes

john lucas

I buy from TRipar Inc. It's a wholesale supplier of business display merchandise. They just happen to carry round mirrors to put things on. You need a tax no and minimum purchase is $120. I do have a supplier listed on my home computer that will sell small quantities of mirrors at reasonable prices. If you want it I'll try to remember to look it up tonight.

Re: my mirror supplier changes sizes

#10

Re: my mirror supplier changes sizes

john lucas

I measured them again last night and they are 101mm or close. What an odd size. doesn't matter as long as I know and can correct for it.

Re: my mirror supplier changes sizes

#11

Jesper, Denmark

Re: my mirror supplier changes sizes

Jesper, Denmark

John, the two dimensions are not the same. 101 mm is just a tad under 4 inches (3.976 inches). The 4.093 is close enough to 104 mm to make sense (103.962 mm).

The 101 is likely to be intended to be 4 inches with some tolerance, but why the 104 mm??

Using a standard caliper with a vernier scale, 0.1 mm is about as accurate as you get.

Just for the sake of completeness, 1 inch is 25.4 mm.

Re: my mirror supplier changes sizes

#12

Re: my mirror supplier changes sizes

John Lucas

I'm going to have to check either my mirrors or my ruler. I know the one I read was exactly 101. I used vernier calipers to measure the mirror that went in the Desk Mirror which was a different piece of glass. I'll measure several tonight and see. That would suck if they are all a little different. I'd have to put labels on each piece of glass to make sure it stays with the wood during the production stage.